The Standard Electrical Dictionary Part 132
You’re reading novel The Standard Electrical Dictionary Part 132 online at LightNovelFree.com. Please use the follow button to get notification about the latest chapter next time when you visit LightNovelFree.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy!
Radiometer, Electric.
A radiometer in which the motion of the molecules of air necessary for rotation of the vane is produced by electrification and not by heating.
Radio-micrometer.
An instrument for detecting radiant energy of heat or light form. It consists of a minute thermopile with its terminals connected by a wire, the whole suspended between the poles of a magnet. A minute quant.i.ty of heat produces a current in the thermopile circuit, which, reacted on by the field, produces a deflection. A convex mirror reflecting light is attached so as to move with the thermopile. The instrument is of extraordinary sensitiveness. It responds to .5E-6 of a degree Centigrade or about 1E-6 degree Fahrenheit.
Radiophony.
The production of sound by intermittent action of a beam of light upon a body. With possibly a few exceptions all matter may produce sound by radiophouy.
Range Finder.
An apparatus for use on s.h.i.+pboard to determine the distance of another s.h.i.+p or object. It is designed for s.h.i.+ps of war, to give the range of fire, so as to set the guns at the proper elevation. The general principle involved is the use of the length of the s.h.i.+p if possible, if not of its width, as a base line. Two telescopes are trained upon the object and kept trained continuously thereon. The following describes the Fiske range finder.
The range finder comprises two fairly powerful telescopes, each mounted on a standard, which can be rotated round a vertical axis, corresponding with the center of the large disc shown in the engraving. One-half of the edge of this disc is graduated to 900 on either side of a zero point, and below the graduation is fixed a length of platinum silver wire. This wire only extends to a distance of 81.10 on either side of zero, and is intended to form two arms of a Wheatstone bridge. The sliding contact is carried by the same arm as the telescope standards, so that it moves with the telescope. The two instruments are mounted at a known distance apart on the s.h.i.+p, as shown diagrammatically in the cut. Here A and B are the centers of the two discs, C and D the arms carrying the telescopes, and E and F the platinum silver wires. Suppose the object is at T, such that A B T is a right angle, then AT=AB/sin(ATB).
448 STANDARD ELECTRICAL DICTIONARY.
If the two sectors are coupled up as shown, with a battery, h, and a galvanometer, by the wires, a b and c d, then since the arm, e, on being aligned on the object takes the position c1 while d remains at zero, the Wheatstone bridge formed by these segments and their connections will be out of balance, and a current will flow through the galvanometer, which may be so graduated as to give the range by direct reading, since the current through it will increase with the angle A T B.
Fig. 281. RANGE FINDER.
In general, however, the angle A B T will not be a right angle, but some other angle. In this case AT = AB / sin(A T B) * sin( A B T), and hence it will only be necessary to multiply the range reading on the galvanometer by the sine of the angle A B T, which can be read directly by the observer at B. This multiplication is not difficult, but by suitably arranging his electrical appliances Lieutenant Fiske has succeeded in getting rid of it, so that the reading of the galvanometer always gives the range by direct reading, no matter what the angle at B may be. To explain this, consider the two telescopes shown in the cut in the positions C and D; the whole current then has a certain resistance.
449 STANDARD ELECTRICAL DICTIONARY.
Next suppose them, still remaining parallel, in the positions C1 and D1.
The total resistance of the circuit is now less than before, and hence if C1, one of the telescopes, is moved out of parallel to the other, through a certain angle, the current through the galvanometer will be greater than if it were moved through an equal angle out of a parallel when the telescopes were in the positions C and D. The range indicated is, therefore, decreased, and by properly proportioning the various parts it is found that the range can always be read direct from the galvanometer, or in other words the multiplication of A B/sin( A T B ) by sin( A B T ) is to all intents and purposes performed automatically.
There is, it is true, a slight theoretical error; but by using a small storage battery and making the contents carefully it is said to be inappreciable. Each telescope is fitted with a telephone receiver and transmitter, so that both observers can without difficulty decide on what point to align their telescopes. It will be seen that it is necessary that the lines of sight of two telescopes should be parallel when the galvanometer indicates no current. It has been proposed to accomplish this by sighting both telescopes on a star near the horizon, which being practically an infinite distance away insures the parallelism of the lines of sight.
Rate Governor.
An apparatus for securing a fixed rate of vibration of a vibrating reed.
It is applied in simultaneous telegraphy and telephoning over one wire.
The principle is that of the regular make and break mechanism, with the feature that the contact is maintained during exactly one-half of the swing of the reed. The contact exists during the farthest half of the swing of the reed away from the attracting pole.
Fig. 282. LANGDON DAVIRS' RATE GOVERNOR.
In the left hand figure of the cut, K is the key for closing the circuit. A is the base for attachment of the reed. V is the contact-spring limited in its play to the right by the screw S. C is the actuating magnet. By tracing the movements of the reed, shown on an exaggerated scale in the three right hand figures, it will be seen that the reed is in electric contact with the spring during about one-half its movement. The time of this connection is adjustable by the screw S.
Synonym--Langdon Davies' Rate Governor or Phonophone.
450 STANDARD ELECTRICAL DICTIONARY.
Ray, Electric. Raia torpedo.
The torpedo, a fish having the same power of giving electric shocks as that possessed by the electric eel, q. v. (See also Animal Electricity.)
Fig. 283. TORPEDO OR ELECTRIC RAY
Reaction of Dynamo, Field and Armature.
A principle of the dynamo current generator, discovered by Soren Hjorth of Denmark.
When the armature is first rotated it moves in a field due to the residual magnetism of the field magnet core. This field is very weak, and a slight current only is produced. This pa.s.sing in part or in whole through the field magnet cores slightly strengthens the field, whose increased strength reacts on the armature increasing its current, which again strengthens the field. In this way the current very soon reaches its full strength as due to its speed of rotation.
The operation is sometimes termed building up.
Sometimes, when there is but a trace of residual magnetism, it is very hard to start a dynamo.
Reading Telescope.
A telescope for reading the deflections of a reflecting galvanometer.
A long horizontal scale is mounted at a distance from the galvanometer and directly below or above the centre of the scale a telescope is mounted. The telescope is so directed that the mirror of the galvanometer is in its field of view, and the relative positions of mirror, scale and telescope are such that the image of the scale in the galvanometer mirror is seen by the observer looking through the telescope.
Under these conditions it is obvious that the graduation of the scale reflected by the mirror corresponds to the deflection of the galvanometer needle.
The scale may be straight or curved, with the galvanometer in the latter case, at its centre of curvature.
Reamur Scale.
A thermometer scale in use in some countries of Continental Europe. The temperature of melting ice is 0?; the temperature of condensing steam is 80?; the degrees are all equal in length. For conversion to centigrade degrees multiply degrees Reamur by 5/4. For conversion to Fahrenheit degrees multiply by 9/4 and add 32 if above 0? R., and if below subtract 32. Its symbol is R., as 10? R.
451 STANDARD ELECTRICAL DICTIONARY.
Recalescence.
A phenomenon occurring during the cooling of a ma.s.s of steel, when it suddenly emits heat and grows more luminous for an instant. It is a phase of latent heat, and marks apparently the transition from a non-magnetizable to a magnetiz able condition.
Receiver.
In telephony and telegraphy, an instrument for receiving a message as distinguished from one used for sending or transmitting one.
Thus the Bell telephone applied to the ear is a receiver, while the microphone which is spoken into or against is the transmitter.
The Standard Electrical Dictionary Part 132
You're reading novel The Standard Electrical Dictionary Part 132 online at LightNovelFree.com. You can use the follow function to bookmark your favorite novel ( Only for registered users ). If you find any errors ( broken links, can't load photos, etc.. ), Please let us know so we can fix it as soon as possible. And when you start a conversation or debate about a certain topic with other people, please do not offend them just because you don't like their opinions.
The Standard Electrical Dictionary Part 132 summary
You're reading The Standard Electrical Dictionary Part 132. This novel has been translated by Updating. Author: T. O'Conor Sloane already has 553 views.
It's great if you read and follow any novel on our website. We promise you that we'll bring you the latest, hottest novel everyday and FREE.
LightNovelFree.com is a most smartest website for reading novel online, it can automatic resize images to fit your pc screen, even on your mobile. Experience now by using your smartphone and access to LightNovelFree.com
- Related chapter:
- The Standard Electrical Dictionary Part 131
- The Standard Electrical Dictionary Part 133