The Standard Electrical Dictionary Part 98

Magnetic Axis.

The line connecting the poles of a magnet. It does not generally coincide exactly with any symmetrical axis of figure. In such cases an error is introduced into the indications of the needle which must be determined and allowed for in compa.s.ses. To determine it with a magnetic needle the suspension cup is made removable, so that the needle can be reversed. Readings are taken with one side of the needle and then with the other side of the needle up, and the average corresponds with the position of the magnetic axis in both positions of the needle.

Magnetic Azimuth.

The angle, measured on a horizontal circle, between the magnetic meridian and a great circle of the earth pa.s.sing through the observer and any observed body. It is the astronomical azimuth of a body referred to the magnetic meridian and therefore subject to the variation of the compa.s.s. The angle is the magnetic azimuth of the observed body.

Magnetic Battery.

A name for a compound permanent magnet; one made up by bolting or clamping together, or to single soft iron pole pieces, a number of single permanent magnets. There are a number of forms of compound magnets. In making them care has to be taken to have them of even strength. It is also well to have them slightly separated. The object of both these precautions is to prevent a stronger element or magnet from depolarizing its neighbor.

Synonym--Compound Magnet.

Magnetic Bridge.

An apparatus for testing the relative permeability of iron. It consists of a rectangular system of iron cores. Three of the sides are wound with wire as shown. The other side is built up of double bars, and from the centre two curved arms rise, as shown in the cut. The arms do not touch.

Between them a short magnet is suspended by a filament, which also carries a mirror and an index.

339 STANDARD ELECTRICAL DICTIONARY.

Fig. 219. MAGNETIC BRIDGE.

A lamp and scale are provided as in the reflecting galvanometer. When adjusted the magnetic needle hangs as shown in the cut, Fig. 219, without any tendency to turn towards either curved pole piece. If all iron parts are symmetrical and of similar metal, a current through the coils will make no difference. It will work in magnetic opposition upon the two arms, or, in other words, will maintain both arms at identical potential.

Fig. 220. POLE PIECES, MAGNETIC NEEDLE AND MIRROR OF MAGNETIC BRIDGE.

If there is the least difference in permeability, length or thickness between any of the iron bars the magnetic potential of the two curved arms will differ, and the magnetic needle will turn one way or the other. In practical use different samples of iron are subst.i.tuted for the unwound members of the fourth side of the parallelogram, and the needle by its motions indicates the permeability.

In the cut, Fig. 220, D D are the ends of the curved pole pieces; A the wire carrying the mirror B and magnetic needle N, and E is the index which shows the larger deflections.

340 STANDARD ELECTRICAL DICTIONARY.

Magnetic Circuit.

A magnetic field of force is characterized by the presence of lines of force, which, while approximately parallel, curve around and tend to form closed curves. The polarity of a field of force is referred to an imaginary direction of the lines of force from the north pole through s.p.a.ce to the south pole, and in the part of the field corresponding to the body of the magnet, from the south to the north pole. The cut indicates these features. Hence the magnetic field of force is termed the magnetic circuit, and to it are attributed a species of resistance termed reluctance, q. v., and the producing cause of the field or lines of force is termed sometimes magneto-motive force, q. v.) corresponding to the electro-motive force. The modern treatment of the magnetic circuit is similar to the application of Ohm's law and the laws of resistance and conductivity to the electric circuit.

Magnetic Circuit, Double.

A magnetic circuit which virtually represents two horseshoe magnets placed with their like poles in contact. It is used for field magnets, the armatures occupying a place between the consequent poles.

Fig. 221. ONE-HALF PORTION OF A DOUBLE MAGNETIC CIRCUIT.

Magnetic Concentration of Ores.

The concentration of ores or the freeing them from their gangue by magnetic attraction. It is only applicable to those cases in which either the ore itself or the gangue is attracted by the magnet. Its princ.i.p.al application is to the concentration of magnetic iron sands.

(See Magnetic Concentration.)

Magnetic Concentrator.

An apparatus similar to a magnetic separator, q. v., but used to concentrate magnetic iron sands. By the action of electro-magnets the magnetic iron sand (magnet.i.te) is separated from the sand with which it is mixed.

Magnetic Conductivity and Conductance.

The first notion of permeance and of the magnetic circuit included the idea of magnetic conductivity, which conducted lines of force urged by magneto-motive force through a magnetic circuit. The terms are displaced by permeability and permeance.

341 STANDARD ELECTRICAL DICTIONARY.

Magnetic Continuity.

The completeness of a magnetic circuit, as when the armature of a horseshoe magnet is in contact with both poles. It is an attribute of a paramagnetic substance only and is identical for permanent magnets or for electro-magnets. An air s.p.a.ce intervening between armature and magnet poles, or a s.p.a.ce filled with any diamagnetic substance prevents continuity, although the lines of force to some extent still find their way around. The leakage is increased by discontinuity.

Magnetic Control.

Control of a magnetic needle, magnet, iron index or armature, in a galvanometer, ammeter or voltmeter by a magnetic field; the rest.i.tutive force being derived from a permanent magnet.

Magnetic Couple.

The couple of magnetic force which tends to bring the magnetic needle into the plane of the magnetic meridian. One force is represented by the imaginary pull upon the north pole, and the other by the opposite pull upon the south pole of the needle. The moment of the couple varies from a maximum when the needle is at right angles to the plane of the magnetic meridian to zero when it is in such plane.

Magnetic Creeping.

Viscous hysteresis; the slow increase of magnetism in a paramagnetic body when exposed to induction.

Fig. 222. MAGNETIC CURVES OR FIGURES.

Magnetic Curves.

The pictorial representation of magnetic lines of force. It is generally produced by scattering filings on a sheet of paper or pane of gla.s.s held over a magnet. The filings arrange themselves in characteristic curves.

Tapping the paper or pane of gla.s.s facilitates the arrangement, or jarring the filings off a smaller magnet, so that they fall polarized upon the paper, is thought by some to improve the effect. The group of curves forms what are termed magnetic figures, q. v.

342 STANDARD ELECTRICAL DICTIONARY.

Magnetic Declination.

The angular deviation of the magnetic needle, causing it to rest at an angle with the true meridian; the variation of the compa.s.s. (See Magnetic Elements.)

Magnetic Density.

The intensity of magnetization expressed in lines of force per stated area of cross-section in a plane at right angles to the lines of force.