Steel Traps Part 7
You’re reading novel Steel Traps Part 7 online at LightNovelFree.com. Please use the follow button to get notification about the latest chapter next time when you visit LightNovelFree.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy!
CHAPTER XVI.
HOW TO SET.
Here is a very difficult question, How to Set? yet by carefully noting the ill.u.s.trations in this chapter we believe that many will be benefited, especially inexperienced trappers. Some trappers have continued to set their traps, after years of experience with springs sticking straight out, that is, so that the animal will step upon the spring first. This often warns them of the danger. Others set traps without a sign of covering. In each instance they may catch a few rabbits and perhaps a skunk or two, but they are not trappers and will not catch much game.
Having decided where you are going to set, if at a den, make an excavation the size of the trap and about an inch deep, place the trap in the position (just at the entrance of den) and so that an animal in going in or coming out will not step on the spring but on the pan of the trap.
The trap should be in such a position that the animal will approach if preferably from the end opposite the spring. If the whereabouts of the animal cannot be determined, then the next best way for him to approach is from the spring end of the jaws, the spring always being thrown around towards the cross piece, out of the way.
[Ill.u.s.tration: HOLE SET BEFORE COVERING.]
If setting in a path in a run beside a log or a similar situation, set the jaws endways, not across the path and bring the pan a little to one side of the center, as near as you can judge where the animal will place his foot as he steps over the stick, stone or other object you have prepared for the purpose.
Many trappers place traps well back in the den, but our experience has taught us not to do this. A trapper who has followed the tracks of an animal, in the snow, has undoubtedly noticed that he went to scores of dens but turned away after going to the mouth of most of them. From this it will readily be seen that a trap set well back in the den would not be disturbed, while set as shown would perhaps have caught the animal.
After the trap is set, leaves, moss, gra.s.s, etc., should be carefully placed over the trap and chain, so that everything will appear as natural as possible. In covering traps, use whatever kind of material that was in mouth of den, that is, if the den was filled with leaves, cover the trap with leaves, etc. In this ill.u.s.tration the trap is purposely left uncovered so that trappers can see the position the trap should be in.
[Ill.u.s.tration: ANOTHER HOLE SET BEFORE COVERING.]
If there are other entrances to the den they should all be closed, with the exception of the one where the trap is set. The only time that it is advisable to close all entrances is when you are sure that an animal is within. You are only sure of this when your dog has holed an animal, or you have tracked one in the snow into the den.
There may be times, however, when you have your traps baited and the bait has been taken from the inside. In such cases you feel confident that the game is within. At such times it may be the best policy to close up the entrance and set your trap within, yet, if properly set, you are reasonably sure to make a catch when the animal ventures out and also have a chance to make a catch, should an animal happen along on the outside.
Traps should be set carefully and everything around the den left as natural as before setting. Dig a hole for your trap and carefully cover trap and chain with dirt, leaves or gra.s.s. Be careful that nothing gets under treadle of trap. After once setting traps, go only near enough to see that they are not sprung or containing game.
[Ill.u.s.tration: HOLE SET AFTER COVERING.]
When setting trap in wet earth, place paper, cat tail, dry leaves, gra.s.s or some substance under trap so that during freezing weather the earth will not freeze to spring and jaws, thus preventing its springing when an animal steps on the treadle. A little wool or cotton placed under treadle often keeps the dirt from getting under.
It pays to set traps well--in fact too much pains cannot be taken.
I often read of the disappointments of a trapper when visiting his line of marten traps to find ermine, squirrels, blue-jays and even mice caught in place of the animal he intended to catch.
Now this is very vexatious, as the marten has departed for a district quite distant and is thus lost forever to him. An Indian or a regular trapper that knows his business always puts a spring twig under the pallet of his trap of sufficient strength to bear up the weight of these small fry and yet not too strong to prevent the larger animals from setting it off. In trapping for beaver and otter in open water we always use the spring to prevent mink and musquash from getting caught. Of course these are fur-bearers and proportionately valuable, yet there are times one does not wish to have them in the trap.
Even in setting bear traps a spring under the pallet is used to prevent foxes, lynx, fishers and marten from springing it. This is doubly necessary in setting bear traps for the reason that when one has bear traps set the foregoing animals are unprime and consequently of next to no value. The spring for a No. 1 or a No. 1 1/2 trap is made from a lower small branch of a balsam or tamarack tree. Why I say lower branches is because it is not so full of gum and suppleness as the top branches, while not actually dry, it is sufficiently so to impart a spring effect.
[Ill.u.s.tration: WRONG POSITION SET.]
It is broken off about four inches in length and freed of needles.
One end is introduced into the eye of the spring and the other end is deflected over and under the trap pan. By moving it out towards the outer part of the pan a greater strength and resistance can be obtained--lessening by pus.h.i.+ng it the contrary way. For beaver or otter traps we usually take the root of a small spruce or tamarack, and for a bear trap, instead of putting one end into the eye of the spring, we cut a shorter and stouter piece and bend it over like this and it is placed under the pan; the two ends are carefully flattened and squared off to prevent slipping.
After a little practice a man becomes quite an expert as to the proper tension required and it is very rarely a real trapper catches anything but what the trap was set for. This article is written for the benefit of beginners in the profession of trapping and not as a reflection on the knowledge of "Old Pards."
A splendid all around covering for traps wherever available (and I speak from experience) is hemlock fanlike tips, writes a New York state trapper. Use only the flat spreading ends with thin stems to blanket trap--a single layer is enough for all practical purposes.
This is the general purpose covering, suitable for all kinds of weather. The strong natural scent of the hemlock seems to inspire confidence, overcoming animal fear and caution. It neutralizes and makes harmless all unnatural scents so obnoxious to wild animals and prevents under pan obstruction.
During the snowy weather, roof over the trap with brush, hemlock boughs, bark or such, with openings on all sides. Build the roof high and wide enough to sufficiently protect the trap and covering from snow and sleet. A good trapper uses only good traps.
I will describe a few of my sets and hope they will be of value, writes a Rocky Mountain trapper. The first will be a mink set and, like the rest, is best prepared during the summer, then by the time trapping begins the newness is all gone.
Set No. 1 is easily made by bending a few green willows in the shape of the letter U; stick them in a row six inches apart so the top of the bow will be four or five inches from the level. Cut some brush and pile on top and a stake or two driven in will keep it from going away in a freshet. This can be made in the water at a riffle or on the bank of the stream and you will be surprised to note the fine runway you have made.
[Ill.u.s.tration: THE THREE LOG SET.]
Set No. 2 is on the same principle, but is made of logs 8 inches in diameter and 5 or 6 feet long. It can be cut on the dotted lines for convenience in placing bait. Set a No. 1 1/2 or 2 trap at each end.
This is as good as a hollow log.
[Ill.u.s.tration: MARTEN SHELF SET.]
No. 3 is a marten shelf. Like cut, make by nailing a 2-inch stick three or three and a half feet long on each side of a tree and cover the projecting ends with bark--use a weight on bark to keep it from blowing away; nail bait and place trap as shown. Use a spring pole of some description.
[Ill.u.s.tration: BIG GAME SET.]
No. 4 is my favorite for bear, mountain lion and in fact all larger game. Choose two trees near together and place a pole from one to the other on which to hang the bait; 1 is bait the height of which should be varied according to the game sought and 2 is the pole on which bait is hung; it can be nailed on or laid in forks.
In setting steel traps the beginner is generally very careless. He simply sets his trap on the bare ground, brushes a few leaves over it and stakes it fast, or staples it fast to a stump or tree. As a rule he finds that the wind has blown the leaves off his trap, leaving it bare, or it has frozen fast to the ground, or if it has made a catch the game has escaped.
In setting a steel trap, dig a hole an inch deep and the size and shape of the trap when set. Line this hole with dry leaves and set the trap in it, filling in between the jaws with dry moss and covering with dry, light substance in keeping with the surroundings.
For trapping the shyer animals the smell of iron should be destroyed, which may be done by boiling the trap in cedar or hemlock tips. The trap should be covered with these tips so that trap and bed all smell alike. Do not make any tracks or have the bushes or gra.s.s trampled down around the trap. Animals are more afraid of human signs than they are of human scent, at least I have found it so.
In setting the trap, be sure that the jaws lie down solid or the animal may tip the trap over by stepping on a jaw and you will think that you have a very cunning animal to deal with.
If the trap is set at a den or enclosure, turn the spring to one side so the animal will not step on the spring. I prefer the Blake pattern trap as the trap may be set with the spring pointing straight out from the enclosure and the animal steps between the jaws, not over them. Be sure, when setting at a den or covered enclosure that the opening over the trap is large enough to allow the animal to walk over the trap, for if they must crawl over it they are apt to snap the trap by pressing against it and all the trapper finds is a little bunch of fur. In setting traps on dry land do not stake it down as the game will often escape by pulling its foot out of the trap. It is much better to fasten the trap to a brush drag. I leave a good stout p.r.o.ng near the big end of the brush. Bend this p.r.o.ng down and slip the ring over it.
[Ill.u.s.tration: RING OR LOOP FASTENING.]
When making a water set I stake the trap into the water full length of the chain. If the water is deep use the sliding pole. If you are trapping muskrats, clean out all snags and brush from around the trap or the rat may cut its skin in its struggles, which will lessen its value.
Here is a method of drowning the beaver and otter which was told me by an old trapper. Take a good stout wire about eight or ten feet long and fasten it to the end of the trap chain. A heavy stone is tied to the chain of the trap and after the trap is set the wire is stretched up or down stream and fastened to a stake driven in the bank under water. When the game is caught it plunges into the water and the weight of the stone and trap pulls it down to the bottom. The trap and game are secured by pulling up on the wire. I have never used this method, but think it would be all right.
If the trap is a "bolt" double spring, place the trap on the knee and press down spring and insert a nail--six or eight penny will do--under the jaw on the opposite side from the trigger or trip, being careful to insert far enough to hold and not slip out. Then set same as a single spring trap.
If the trap has the slip in jaws, drill a small hole in the bottom piece just below the holes which the jaws are in for a nail. One spring will hold the pan up. When set, press the other spring down and pull out the nail. One trial will convince anyone that this is an easy and quick way to set a double spring trap. I have never tried this on anything larger than No. 4 wolf trap. Hundreds of times have I said things that I would not say in Church or Sunday School while setting one of these traps in the snow. Trapper language will come forth when one pinches his fingers on a cold, frosty morning.
CHAPTER XVII.
WHERE TO SET.
Knowing exactly where to set in all cases can not be told unless the trapping region is seen as well as each den, but in a general way some points can be given that will prove of value. Favorable places to set can be made to include a number of situations. By this we mean that many take a good part of their catch each season at places away from the dens or homes of animals. Time and again have we seen traps set along creeks, in the woods, at drift piles and other places where there were no dens. Yet these trappers knew that fur-bearing animals frequented such places.
A trapper always should be on the outlook for signs of game. These include dung at dens, tracks at dens and along creeks and low wet places, feathers and bones at dens, etc. A close inspection of dens, will also show long hairs, if the same is used much by animals just before the fur begins to get good, as they then shed many of the long hairs. The experienced trapper knows from these just what kind of an animal is using a certain den, and of course he knows what sized trap to use and how to proceed to set the same for the capture of the game.
[Ill.u.s.tration: CAUGHT WITHIN THE LIMITS OF CHICAGO.]
An important thing for all trappers to learn is to distinguish dens used by fur-bearing animals from those of rabbits, etc. This can be done in several ways: Long hairs of skunk, opossum, c.o.o.n, etc., are frequently found in the entrance to dens; tracks of these and other animals should be watched for; pieces of bones and feathers near dens is also a good indication that game is in the near vicinity--at least it may be known that it has been there quite recently.
Steel Traps Part 7
You're reading novel Steel Traps Part 7 online at LightNovelFree.com. You can use the follow function to bookmark your favorite novel ( Only for registered users ). If you find any errors ( broken links, can't load photos, etc.. ), Please let us know so we can fix it as soon as possible. And when you start a conversation or debate about a certain topic with other people, please do not offend them just because you don't like their opinions.
Steel Traps Part 7 summary
You're reading Steel Traps Part 7. This novel has been translated by Updating. Author: Arthur Robert Harding already has 550 views.
It's great if you read and follow any novel on our website. We promise you that we'll bring you the latest, hottest novel everyday and FREE.
LightNovelFree.com is a most smartest website for reading novel online, it can automatic resize images to fit your pc screen, even on your mobile. Experience now by using your smartphone and access to LightNovelFree.com
- Related chapter:
- Steel Traps Part 6
- Steel Traps Part 8