What Philately Teaches Part 2
You’re reading novel What Philately Teaches Part 2 online at LightNovelFree.com. Please use the follow button to get notification about the latest chapter next time when you visit LightNovelFree.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy!
[Ill.u.s.tration: Stamp, "Congo", 25 centimes]
[Ill.u.s.tration: Stamp, "British Guayana", 1897, 1 cent]
[Ill.u.s.tration: Stamp, "British Guayana", 1897, 2 cents]
[Ill.u.s.tration: Stamp, "New Zealand", 5 pence]
[Ill.u.s.tration: Stamp, "Toga", 3 d.]
[Ill.u.s.tration: Stamp]
Crowns and post-horns figure on many stamps and both are significant of the authority and purpose of these seemingly trifling bits of paper. An interesting combination of these two emblems is found on one of the newspaper stamps of Hungary. In this case the crown is not merely a creation of the artist's fancy but the historic crown of Saint Stephen, the "iron crown of Hungary," so called because it has within its rim an iron band said to be made from one of the nails of the cross.
In all these subjects of thought I have mentioned only a few examples under each head. The number might be multiplied many times, did I not fear to weary you.
But, turning from the purely pictorial side, let us consider the material side of stamps and the various methods employed in producing them. The design having been selected, it becomes necessary to reproduce it in some form suitable for making stamps in large quant.i.ties. In a general way we may divide stamp printing into two cla.s.ses: printing from metal plates and printing from stone, or lithography. The first cla.s.s contains two grand sub-divisions. In the first of these sub-divisions the lines to be reproduced are sunken below the surface of the plate.
This is known as _taille douce_ or line engraving. It is also called copper plate and steel engraving. The copper plates for our visiting cards are familiar examples of this style of work and our national paper currency presents very beautiful and elaborate results of the process.
The second sub-division is known as typography or surface printing. As its name indicates, the lines to be reproduced are at the surface of the plate, the other parts being cut away. A newspaper is an example of typographical printing, the term being applied to designs made up from type, as well as to specially prepared plates.
I need not suggest to you how wide a field for thought and exploration this subject of engraving opens to us, leading as it does directly into the world of books, pictures and art. But at present we must confine ourselves to the subject as applied to postage stamps, save for a brief consideration of its origin and history.
The art of engraving owes its origin to the Florentine goldsmiths of the fifteenth century. They were accustomed to ornament their work with incised lines which were filled with black enamel. A design thus filled with enamel was called a _niello_, a derivative of the word _nigellum_ (the most black). The bra.s.s and nickel signs with black letters, which we find at the doors of business houses, are modern forms of _nielli_.
While making a _niello_, the artist naturally wished to see how the work was progressing and if any alterations were required. It was not desirable to put the enamel in the design because it was difficult to remove. To avoid this an impression of the work was taken in clay, from which a sulphur cast was made. The lines of the cast were filled with lamp black. Thus a copy of the work was obtained which reproduced its coloring and showed the condition of the engraving. A more simple process was discovered later. This consisted in filling the lines of the engraving with a thick ink and pressing a sheet of damp paper against them. Sufficient pressure was used to force the paper into the lines and take up the ink on its surface. This was the beginning of line engraving and plate printing. The process was at first employed for the preservation and duplicating of designs for goldsmith's engraving and afterwards for the sake of the work itself. It was not until the next century that the process a.s.sumed a leading place in the world of art. If it were not going too far away from our subject we might study the early engravers and their work with much profit and entertainment. But it is our purpose to consider the subject only so far as it applies to postage stamps.
Until the early part of the present century copper was practically the only metal used for engraving. Only a limited number of impressions can be taken from a copper plate because it wears rapidly, and it is not suited to such work as the production of postage stamps. About 1830 the way was found to make steel of sufficient softness and fineness of grain to be available for engraving. To-day annealed steel is almost exclusively used for this purpose. Annealed steel is steel which has been softened without being decarbonized. The surface is carefully ground and polished to a mirror-like brightness. Any work which is to be reproduced many times, such as postage stamps and parts of bank-notes, is made on small pies of steel called dies.
If the design to be used is in the shape of a drawing or engraving, a sheet of gelatin may be laid over it and the outlines traced with a sharp-pointed instrument. More often a photograph is taken on a ferrotype plate and the outlines scratched into the plate. These outlines are filled with vermilion. A piece of paper is then laid on the plate and the two pa.s.sed through a hand-press. This is called "pulling"
an impression. While the ink of the impression is still moist it is sprinkled with powdered vermilion to strengthen the lines. The block of steel is then covered with an etching ground (a composition of asphaltum, wax, resin and ether) and the impression is transferred to this. The outlines are cut through the etching ground and bitten into the steel with acid. The coating is then removed from the block and the artist proceeds with the engraving. The mechanical details and various methods of engraving are highly interesting but time will not permit their discussion.
An engraver is seldom expert in more than one style of work. Each makes a specialty of some branch, portraiture, lettering, scroll-work, etc.
For this reason several engravers are usually employed on each die for a postage stamp. And in this inability of one individual to do all styles of work equally well lies one of the great securities against counterfeiting.
In the course of making a die, proofs are usually taken and these are much prized by collectors.
The die being finished, it is placed in a bath of cyanide of pota.s.sium and heated until the vessel containing it is red hot. This process occupies from fifteen minutes to half an hour for dies but may take as much as an hour for a large plate. The die is then transferred to a bath of oil, to cool and temper it. By this process it is thoroughly hardened.
[Ill.u.s.tration: From "The Popular Science Monthly," Vol. XLVI, No. 5.
Copyright, 1895, by D. Appleton & Co.]
In the case of postage stamps, where it is desired to exactly duplicate the design many times on a plate, recourse is had to transfer rolls. A transfer roll is a piece of soft steel, in shape a cross section of a cylinder. The edge is sufficiently wide to receive an impression from the die. We show you here a picture of a transfer press. From each side of the roll projects a small pin or trunion. These pins form an axle for the roll and by them it is held in the carrier of the press. A is the roll in the carrier. The die is placed on the table or bed B. The roll is held against the die with a pressure of many tons, obtained by compound leverage. By means of the wheel, E, and the connecting pinion and rack, the bed, carrying with it the die, is moved back and forth under the roll. This is called "rocking" and by it the soft steel of the roll is forced into the die and a reverse impression of the design is obtained. The roll is then hardened and, by a reversal of the process, impressions from it are transferred to the steel plate from which the stamps are to be printed. The plate is, of course, soft at first and is hardened after the required number of designs have been transferred to it. This process is so perfect that the most delicate lines of the die are repeated with absolute fidelity on the plate. When many plates of a stamp are likely to be needed, it is customary, in order to avoid risk of wear or damage to the original die, to make duplicate dies, called transfer dies, and from them the necessary rolls to make the plates.
The plates are made with great care. They are touched up by hand and subjected to close scrutiny and the work is often gone over a number of times before the result is p.r.o.nounced satisfactory. Incidentally any guide lines and marks used by the transferrer are removed by burnis.h.i.+ng.
In the older issues of United States stamps, such lines and dots are frequently found on the stamps but the later issues are very free from them.
Plates that have become worn are "re-entered," that is to say, the transfer roll is applied to the plate in the original position and the lines thus sharpened and deepened. If, by any mistake in making or re-entering a plate, the roll is incorrectly placed and then changed to the correct spot, a double impression of some of the stronger lines will result. This is called a "double transfer" and sometimes, though wrongly, a "s.h.i.+fted die." These double transfers are quite common in the United States stamps made before 1861 but are scarce in the late issues, either because the work is now more carefully done or because any mistakes have been corrected. Such a correction is effected by turning the plate on its face on a hard substance, hammering on the back until the surface is driven up smooth and then entering the design anew.
A number of very delicate machines are used as aids to the engraver, though much more for bank-notes and large pieces of work than for postage stamps. These are called ruling machines, medallion rulers, cycloidal and geometric lathes. Ruling machines are used to make the backgrounds of portraits, the shadings of letters and similar work.
[Ill.u.s.tration: Coin Stamp, "New South Wales", 5 s.h.i.+llings]
Here is a very pretty example of ruling, in the so-called "coin" stamp of New South Wales. These machines rule either straight or curved lines.
They can be adjusted to rule several thousand lines to an inch, but that is only done for microscopical work, not for engraving. The general principle of a medallion ruling machine is a rod, fixed on a pivot, at one end of which is a pin which is drawn across a medallion, while at the other end a graving point traces a corresponding line on the steel.
The large stamps issued in the United States in 1865, for the payment of postage on newspapers and periodicals, are examples of this work.
Cycloidal ruling in its simplest form resembles a series of loops. It is produced by a fixed point which is held against a plate while the latter is moved in a circle and, at the same time, forward. By altering the size of the circle and the speed of the forward movement a great variety of results are obtained. By cutting one series of loops over another, lace-like effects are produced. The process is still further varied by the use of eccentrics.
[Ill.u.s.tration: Ruling Patterns]
The geometric lathe is a most delicate and complicated machine. By means of elaborate attachments very involved and eccentric motions are given to the plate under the graving point and extremely complicated and beautiful designs are produced. I think we are all familiar with these from the examples on our national currency. Geometric lathework was used on a number of the United States stamps of the issue of 1861 and also on the $5,000 revenue stamp. The work of this machine is regarded as a great safeguard against counterfeiting. The most skillful engraver would have difficulty in imitating the simplest designs produced by it. The machines are too expensive to be obtained by anyone but a government or a great banknote company and there are very few men who thoroughly understand operating them. A turn of a screw or a variation of a single cog will change the result entirely. Finally the work of the lathe is often reversed, so that the line which is cut by the graver and should print in color prints white, and vice versa. It would not be possible to imitate this by hand engraving.
Printing from line-engraved plates is largely done by hand presses. The ink used is very thick. When black it is made of finely pulverized carbon, mixed with oil. Colored inks are composed of zinc white and dry colors, ground in oil. The colors are animal, vegetable or mineral. The latter cause the plates to wear out rapidly. Green is an especially destructive color. In recent years aniline colors have been largely employed. They afford an elaborate range of shades and color combinations which are most puzzling to describe. Soluble inks are much used by the leading English firm of stamp printers. They are very sensitive to water and are regarded as one of the best preventatives of the cleaning of used stamps. Beautiful results are obtained by printing stamps in two colors. Of course, this necessitates the use of two plates for each design. This also gives rise to some interesting varieties, caused by one part of the design being printed upside down. Such oddities are scarce and are highly valued by philatelists.
When a plate is to be printed from, it is first warmed, then the ink is applied and rubbed into the lines with a pad. The surface of the plate is wiped off with a cloth, then with the hand and lastly, polished with whiting. A sheet of dampened paper is next laid on the plate and the whole is pa.s.sed under the roller of a press, which forces the paper into the lines of the plate, where it takes up the ink. When the plate is deeply engraved the ink seems to stand up from the surface of the paper in ridges and some times we find corresponding depressions on the backs of the stamps. The sheets are then dried, gummed and dried again. They are now so much curled and wrinkled that they are placed between sheets of bristol board and subjected to hydraulic pressure of several hundred tons which effectively straightens them out.
The second process of printing from metallic plates is called typography. The plates for this process are the exact reverse of those engraved in _taille douce_. Instead of the design being cut into the plate, it is on the surface and everything else is cut away. Hence, the term "surface printing." This form of engraving is also called _epargne_ engraving, because the parts of the plate which bear the design are _epargne_ (preserved.)
The dies for typographical plates are cut in wood or steel, usually the former. They are reproduced by two methods, stereotyping and electrotyping. In the former process casts of the die are taken in papier mache or plaster of Paris. From these casts other casts are taken in type-metal. A sufficient number of these casts are clamped together or fastened to a backing of wood and thus form a plate. This process is not much used for stamps. It may interest you to know that most of our large newspapers employ this process. The type-set forms are, of course, flat. From them papier mache impressions are taken and bent into a curve, so that the casts made from them will fit the cylinders of the printing presses.
In electrotyping, an impression is taken from the die in wax or gutta percha. The surface of this impression is coated with powdered plumbago.
It is placed in a solution of sulphate of copper and, by the action of a galvanic battery, a thin sh.e.l.l of copper is deposited on it. This sh.e.l.l is backed with type-metal and is then ready for use. A number of these elecrotypes may be fastened together and electrotyped in one piece.
There is also a photographic process for making typographical dies. This is said to be used in making the stamps of France and her colonies.
[Ill.u.s.tration: Cliche with two stamps, "Colombia", 5 cents]
[Ill.u.s.tration: Cliche with two stamps, "Colonies de l'Empire Francais", 10 c.]
Stereotypes or electrotypes of single stamps are called _cliches_. In making up a plate it sometimes happens that a _cliche_ is placed upside down. The result, after printing, is a stamp in that position. This is called a _tete beche_. We ill.u.s.trate here such a stamp and another which is semi _tete beche_, i.e., turned half around instead of being entirely inverted. Like all oddities these are prized by stamp collectors.
[Ill.u.s.tration: Stamp Arrangement, "Newfoundland", 3 pence]
The triangular stamps of the Cape of Good Hope and New Foundland are so arranged in the plate that half of them are _tete beche_ to the other half. The same is true of the stamps of Grenada of the issue of 1883.
[Ill.u.s.tration: Stamp, "Hawaiian Postage", 5 cents]
[Ill.u.s.tration: Stamp, "Petersburg, Virgina", 5 cents]
[Ill.u.s.tration: Stamp, "Eranco en Guadalajara", 2 reales]
[Ill.u.s.tration: Stamp, "Ile de la Reunion", 15 centimes]
Another form of typography is found in stamps which are composed of printer's type and ornaments. These are usually called "type-set", to distinguish them from stamps produced by the normal process of typography. Stamps made in this manner are often of a high degree of rarity, having been produced in remote parts of the world, where facilities were limited and the use of stamps restricted. To this cla.s.s belong the stamps of the first issues of British Guiana, Hawaii and Reunion, which rank among the greatest philatelic rarities. We show you here a number of type-set stamps. The first was used in the Hawaiian Islands, in payment of postage on letters between the different islands.
There are a number of plates of these stamps, of different values, and each containing ten varieties. The second stamp was issued by the postmaster of Petersburg, Va., in the early days of the war of the rebellion and before the postal service of the Confederate government was in working order. The third was used in the city of Guadalajara, Mexico, in 1869, during the war between France and that country. It was made from the cancellation stamp in use in the post office, the usual date being replaced by the value. The stamps were struck by hand on sheets of paper which had been previously ruled into squares with a lead pencil. The fourth stamp is one of the Reunion stamps previously mentioned. There were eight stamps in the setting, four having a central device like the stamp shown, and the other four being of a different design.
It is interesting to remark that most of these type-set stamps show an evidence of their provisional nature and the stress under which they were made, in the paper on which they were printed. It was usually writing paper, such as would be found at a stationers at that period.
Some of the rare type-set stamps of British Guiana were printed on the paper used for lining sugar barrels.
What Philately Teaches Part 2
You're reading novel What Philately Teaches Part 2 online at LightNovelFree.com. You can use the follow function to bookmark your favorite novel ( Only for registered users ). If you find any errors ( broken links, can't load photos, etc.. ), Please let us know so we can fix it as soon as possible. And when you start a conversation or debate about a certain topic with other people, please do not offend them just because you don't like their opinions.
What Philately Teaches Part 2 summary
You're reading What Philately Teaches Part 2. This novel has been translated by Updating. Author: John N. Luff already has 760 views.
It's great if you read and follow any novel on our website. We promise you that we'll bring you the latest, hottest novel everyday and FREE.
LightNovelFree.com is a most smartest website for reading novel online, it can automatic resize images to fit your pc screen, even on your mobile. Experience now by using your smartphone and access to LightNovelFree.com
- Related chapter:
- What Philately Teaches Part 1
- What Philately Teaches Part 3