Wood Carving Part 6

It would be strange, indeed, if all in this vast record of past activity was of equal value; if merely to belong to the past was a sure warrant that such work was the best of its kind. Far from this being the case, it requires the constant use of a more or less trained and critical judgment to separate what is good from the indifferent or really bad in these collections, for all are usually present. There is inequality in artistic powers, in technical skill, and a distinction of yet greater importance, which lies in the significance the works bear as records of the inner life of their creators. Artists, carvers in particular, are the true scribes and historians of their times. Their works are, as it were, books--written in words of unconscious but fateful meaning. Some are filled with the n.o.blest ideals, expressed in beautiful and serious language, while others contain nothing but sorry jests and stupidities.

As all the works of the past, whether good or bad, are the achievements of men differing but little from ourselves, save in the direction of their energies and in their outward surroundings, there is surely some clue to the secret of their success or failure, some light to be thrown by their experience upon our own dubious and questioning spirit.

What better could we look for in this respect than a little knowledge of the lives led by the carvers themselves, a mental picture of their environment, an acquired sense of the influence which this, that, or the other set of conditions must have imposed upon their work. With a little aid from history in forming our judgments, their works themselves will a.s.sist us--so faithful is the transcript of their witness--for, with more certainty than applies to handwriting, a fair guess may be made by inference from the work itself as to the general status and ideals of the workman. The striking a.n.a.logy between its salient characteristics and the prevailing mood of that ever-changing spirit which seeks expression in the arts, is nowhere more marked than in the work of the carver.

CHAPTER XVII

STUDIES FROM NATURE--FOLIAGE

Medieval and Modern Choice of Form Compared--A Compromise Adopted--A List of Plant Forms of Adaptable Character.

It is high time now that we had some talk about the studies from nature which are to furnish you with subjects for your work. I shall at present deal only with studies of foliage, as that is what you have been practising, and I wish you to carry on your work and studies as much as possible on the same lines.

Between the few abstract forms, representing a general type of foliage, so dear to the heart of the medieval carver, and the unstinted variety of choice displayed in the works of Grinling Gibbons and his time, there is such a wide difference that surely it points to a corresponding disparity of aim. Although there is no doubt whatever that such a striking change of views must have had its origin in some deeper cause than that which is to be explained by artistic and technical development, yet I think that for our immediate purpose we shall find a sufficiently good lesson in comparing the visible results of the two methods. Broadly speaking, then, the medieval carver cared more for general effect than for possibilities of technique. He therefore chose only such natural forms as were amenable to his preconceived determination to make his work telling at a distance. He had no botanical leanings, and rejected as unfit every form which would not bend to his one purpose--that of decoration on a large scale--and which he aimed at making comprehensive at a glance, rather than calling for attention to its details. He invented patterns which he knew would a.s.sist in producing this result, and here he further handicapped his choice by limiting it to such forms as would repeat or vanish at regulated intervals, reflecting light or producing shadow just where it was wanted to emphasize his pattern.

The more modern carver, on the contrary, offered an all-embracing welcome to every form which presented itself to his notice. He rejected nothing which could by any possibility be carved. Nothing was too small, too thin, or too difficult for his wonderful dexterity with the carving tools. His chief end was elaboration of detail, and it was often carried to a point which ignored the fact that nearly all of it would become invisible when in position, or, if seen at all, would only appear in confused lumps and unintelligible ma.s.ses.

Now, for many reasons, I think we had better take the medieval method as our model up to a point, and make a certain selection of material for our studies, based upon some relation to general effect, but not necessarily imitating a medieval austerity of rejection, which would be the merest affectation on our part. Upon these principles, and taking somewhat of a middle course, I shall here note a few types of foliage which I think may be useful to you in the work upon which you are engaged.

Leaf forms, with their appropriate flowers or fruit, afford the carver a very large proportion of his subject material. They serve him as princ.i.p.al subject, as bordering or background to figures of men or animals; they occur as mere detached spots, to break the monotony of s.p.a.ces or lines; and in a thousand other ways give exercise to his invention.

As a general rule, those leaves with serrated, or deeply cleft and indented edges, lend themselves most readily to decorative treatment.

Large, broad leaves, with unbroken surfaces, and triangular or rounded outlines, are less manageable. Those most commonly taken as models are:

_The Vine, with its Grapes._--This was freely used by medieval carvers, at first for its symbolic significance, but afterward even more on account of its rare beauty of form. The play of light and shade on its vigorous foliage, the variety of its drawing in leaf, vine, and tendril, and the contrast afforded by its bunches of oval fruit, caused it to be accepted as a favorite subject for imitation in all kinds of carving. It lends itself kindly to all sorts of relief, either high or low, in almost any material. It is so recognizable, even in the rudest attempts at imitation, that its popularity is well deserved.

The hop-vine shares some of these qualities, though much less strongly marked in character.

_The Acanthus._--This leaf was first adapted for the purpose of ornament by the workmen of cla.s.sical Greece. The inspiration was one of the few which they took directly from nature's models. It was also freely used by medieval carvers, but with an insistence upon the flowing and rounded character of its surface forms; and again by the Renaissance artists, with a return to its cla.s.sical character of fluted and formal strength of line. The graceful drawing of its elaborately articulated surface, and the extraordinary accentuation of its outline, provide an endless source of suggestion. It has been adapted in all manners, according to the fancy of the carver--sometimes long and drawn out, at others wide and spreading. Altogether it has been more thoroughly "generalized" than any other natural form.

_The Oak, with its Acorns_, appears in early medieval work, but without much attempt to represent its form with anything like individual character. In later work it has more justice done to its undoubted merits as a decorative feature by a clearer recognition of its beauty in clumps and ma.s.ses. Fruit, other than the grape and a nondescript kind of berry, was seldom represented by medieval craftsmen; it formed, however, a marked feature in Renaissance ornament, where pomegranate, apple, fig, and melon were in constant requisition.

_Flowers_ in general were very little used in early times, and then only in a highly abstract form corresponding to that of the foliage. The rose and lily were the two most frequently seen, but they seldom had more individuality about them than was sufficient to make them recognizable.

During the Renaissance flowers were treated with much more regard to their inherent beauties, and were represented with great skill and power of imitation, although often carried beyond legitimate limits in this direction. When dealt with as ornaments, rather than botanical details, they form a rich source of suggestion to the carver, and offer a ready means of contrast with ma.s.ses of foliage. The rose and lily are such conspicuous flowers that they should, in modern times, be used in a way consistent with our demands for individual character and likeness. They should be fairly well defined and easily recognizable. It is quite possible to treat these flowers in a very realistic way, without endangering their effect as decorative details: they have both such distinguished forms in flower and foliage.

Flowers should be chosen for their _forms_; color should not be allowed to deceive the eye in this respect, unless the color itself is suggestive of lines and contours.

_Foliage_ should always be studied at its prime, never when it is dried and contorted in its forms.

Here is a short list of subjects, including those I have mentioned, all having a sufficiently p.r.o.nounced character to make them valuable as stock in trade. Many more might be named, but these are chosen as being commonly familiar, and as being representative types of various forms.

_For their Leaves and Fruit._--The grapevine, hop-vine, globe artichoke, tomato, apple, plum, pear, bramble, and strawberry.

_For Fruit and Vine-like Growths (leaf.a.ge too ma.s.sive and smooth to be of much value without adaptation)._--The melon, vegetable-marrow, pumpkins, and cuc.u.mber.

_For Leaf.a.ge, Flowers, or Seed Vessels._--The acanthus, oak, thistles, teazle, giant hemlock, cow-parsley, b.u.t.tercup.

_Of Garden Flowers._--The rose, lily, larkspur, peony, poppies, columbine, chrysanthemum, tulip, Christmas rose, j.a.panese anemone.

_For Close and Intricate Designs._--Periwinkle, winter aconite, trefoils of various kinds.

Many valuable hints on this subject may be gleaned by a study of Gerrard's Herbal, which is full of well-drawn ill.u.s.trations, done in a way which is very suggestive to the designer.

A careful study of the outline forms of leaves is a schooling in itself, so much may be learned from it. It teaches the relation between form and growth in a way which makes it possible to use the greatest freedom of generalization without violating structural laws. The same causes which govern the shaping of a tree are present in the leaf, settling its final outline, so that, however wandering and fantastic it may appear, there is not the smallest curve or serration which does not bear witness to a methodical development, and to every accidental circ.u.mstance which helped or hindered its fulfilment.

You could not do better than make a collection of suitable leaves, press them flat and trace them very carefully, keeping the tracings together in a book for reference. Accompanying this you should have in each case a drawing of the leaf as it appears in its natural state, always being careful to do this from a point of view which will accommodate itself to carving the leaf if you should have occasion to use it.

CHAPTER XVIII

CARVING ON FURNITURE

Furniture Constructed with a View to Carving--Reciprocal Aims of Joiner and Carver--Smoothness Desirable where Carving is Handled--The Introduction of Animals or Figures.

[Ill.u.s.tration: FIG. 53.]

You will find in the ill.u.s.trations, Figs. 53 to 62, certain suggestions for various pieces of furniture. They are given with the intention of impressing upon you the fact that very little carving can be done at all without some practical motive as a backbone to your fancies. To be always carving inapplicable panels is very dull work, and only good for a few preliminary exercises. It is much better to consider the matter well, and resolve upon some "opus," which will spread your efforts over a considerable period. When you have decided upon the piece of furniture which is most likely to be useful to you, and which lies within your powers of design and execution, then make a drawing for it, and have it made by a joiner (unless you can make it entirely yourself), to be put together in loose pieces for convenience of carving, and glued up when that is finished. You should certainly design the piece yourself, as you should make all your own designs for the carving. The two departments must be carried on in the closest relation to each other while the work is in progress, otherwise their a.s.sociation will not be complete when it is finished. Take, for instance, the head of the bed in the ill.u.s.tration. Why should it stand up so high, like the gable of a house?

It is for no other reason than to give an opportunity for carving. A plain board of half the height would have been just as effective as a protection to the sleeper. Useless as carving may be from this practical point of view, it must nevertheless be amenable to utilitarian laws. It must be smooth where it is likely to be handled, as in the case of the k.n.o.bs on top of the posts; and even where it is not likely to be handled, but may be merely touched occasionally, it should still have an inviting smoothness of surface. As a matter of fact, all carving on a bed should be of this kind, with no deep nooks or corners to hold dust.

Here, then, are a number of conditions, which, instead of being a hindrance, are really useful incentives to fresh invention. Just as the construction of joiner's work entails concessions on the part of the carver, so the carver may ask the joiner to go a little out of his way in order to give opportunities for his carving. A little knowledge of this subject will make a reasonable compromise possible.

You will find a further advantage in undertaking a fairly large piece of work. As it is almost certain to be in several parts, each may thus receive a different treatment, by which means you not only obtain contrast, but get some idea of the extraordinary power with which one piece of carving affects another when placed in juxtaposition. Whatever designs you may decide upon, should you undertake to carve the panels for a bed, let them be in decidedly low relief. The surface must be smoothly wrought, doing away with as much of the tool marking as you can, but this smoothing to be done entirely with the tools, not by any means with gla.s.s paper. Great attention must be paid to the drawing of the forms, as it is by this that the impression of modeling and projection will be expressed. A very pleasant treatment of such low relief when a smooth and even appearance is wanted, is to carve the ground to the full depth, say 1/8 in., only along the outlines of the design, and form the remainder into a kind of raised cus.h.i.+on, almost level in the middle with the original surface of the wood. The whole design need thus be little more than a kind of deepish engraving, depending for its effect upon broad lights defined by the engraved shadows. See Fig. 54 for an example of this treatment applied to letters.

[Ill.u.s.tration: FIG. 54.]

Now I expect you to make a fresh design. The ill.u.s.trations in all such cases are purposely drawn in a somewhat indefinite way, in order that they may suggest, without making it possible to copy.

[Ill.u.s.tration: FIG. 55.]

Now we come to the mirror frame, Fig. 55. I should suggest that this be done in some light-colored wood like pear-tree, which has an agreeably warm tone, or if a hard piece of cedar can be found, it would look well, but in no case should polish be added except that which comes from the tool. The construction need not be complicated. Take two 3/4-in. boards, glue them together to form the width, shape out the frame in the rough.

Put behind this another frame of 3/4-in. thick stuff, and make the cornice out of wood about 1-1/2 in. thick. The parts to be kept separate until the carving is finished, and afterward glued or screwed together.

The carving on the body of the frame, that is, in the gable above and the front of bracket below, should be in very low relief, the lower part being like the last, a kind of engraving. The fret above may be sunk about 1/16 in. and the ground slightly cus.h.i.+oned. The carving on sides and cornice is of a stronger character, and may be cut as deeply as the wood will allow, while the cornice is actually pierced through in places, showing the flat board behind. The design for this cornice should have some repeating object, such as the kind of pineapple-looking thing in the ill.u.s.tration, and its foliage should be formed with plenty of well-rounded surfaces, that may suggest some rather fat and juicy plant.

[Ill.u.s.tration: FIG. 56.]

In Fig. 56 you have a suggestion for carving a bench or settle, the proportions of which have been taken from one found at a Yorks.h.i.+re village inn. The actual measurements are given in order that these proportions may be followed. It is a well-known fact, that chairs, or seats of any kind, can not be successfully designed on paper with any hope of meeting the essential requirements of comfort, lightness, and stability. Making seats is a practical art, and the development of the design is a matter of many years of successive improvements. A good model should therefore be selected and copied, with such slight changes as are necessary where carving is to be introduced. The main lines should not be interfered with on any account, nor should the thickness of the wood be altered if possible. The carving on this settle is intended to be in separate panels, about two inches apart. These panels will look all the better if no two are quite alike; a good way to give them more variety will be to make every alternate one of some kind of open pattern, like a fret. These piercings need not extend all over the design in the panel in every case: some may have only a few shapely holes mixed up with the lines, others again may be formed into complete frets with as much open as solid. (See Fig. 57.)

The carving should be shallow, and not too fine in detail, as it will get a great deal of rubbing. The material should be, if possible, oak; but beech may be used with very good effect--in neither case should it be stained or polished.

[Ill.u.s.tration: FIG. 57.]