The Bontoc Igorot Part 16

The metal spear blade or head is a product of Igorot workmans.h.i.+p. Baliw.a.n.g, situated about six hours north of Bontoc, makes most of the metal spear blades used in the Bontoc area. Sapao, located about a day and a half to the south, makes excellent metal blades, but they seldom reach the Bontoc culture area, although blades of inferior production from Sapao are found in Ambawan, the southernmost pueblo of the area.

Baliw.a.n.g has four smithies, in each of which two or three men labor, each man in a smithy performing a separate part of the work. One operates the bellows, another feeds the fire and does the heavy striking during the initial part of the work, and the other -- the real blade maker, the artist -- directs all the labor, and performs the finer and finis.h.i.+ng parts of the blade production.

The smithies are about 12 feet square without side walls. They have a gra.s.s roof sloping to within 3 feet of the earth, enlarging the shaded area to near 20 feet square. Near one side of the room is the bellows, called "op-op'," consisting of two vertical, parallel wooden tubes about 5 feet long and 10 inches in diameter, standing side by side. Each tube has a piston or plunger, called "dot-dot';"

the packing ring of the piston is of wood covered with chicken feathers, making it slightly flexible at the rim, so it fits snugly in the tube. The lower end of the bellows tubes rests in the earth, 4 inches above which a small bamboo tube leads the compressed air to the fireplace from each bellows tube. These small tubes, called "to-bong'," end near an opening through a brick at the back of the fire, and the air forced through them pa.s.ses on through the brick to the burning charcoal. The outer end of the to-bong' is cut at an angle, and as the tubes end outside the opening in the brick, the air inbreathed by the bellows, as the plungers are raised, is drawn from back of the fireplace -- thus the fire is not disturbed.

The fuel is an inferior charcoal prepared by the Igorot from pine. This bellows is found throughout the Archipelago and is evidently a Malayan product. It is believed that it came to Bontoc with the Igorot from their earlier home and is not, as some say, a Chinese invention.[29]

The Igorot manufacturer of metal pipes uses exactly the same kind of bellows, except that it is very much smaller, and so appears like a toy. It is poorly shown in Pl. CIX.

Much of the iron now employed in the manufacture of Igorot weapons is Chinese bar iron coming from China to the Islands at Candon, in Ilokos Sur. However, the people readily make weapons from any iron they may acquire, greatly preferring the sc.r.a.ps of broken Chinese cast-iron pots, vessels purchased primarily for making sugar. In his choice of cast iron the Igorot exhibits a practical knowledge of metallurgy, since cast iron makes better steel than wrought iron -- that is, as he has to work.

FIGURE 5

Ironsmith's stone hammer.

The anvils of the smithy, numbering four or five, are large rocks set solidly in the earth. The hammers are nearly all stone, though some of the workmen have a small iron hammer used in finis.h.i.+ng the weapons.

There are several varieties of stone hammers. One weighing about 30 pounds is 16 inches long, 10 inches wide, and from 4 to 6 inches thick. An inch-deep groove is cut in both edges of the hammer, and into these grooves the short, double wooden handle is attached by a withe. Another hammer, similar to the above in shape and attachment, is about one-third its size and weight. There is a still smaller hammer lashed with leather bands to a single, straight wooden handle; and there is also a round hammer stone about 3 inches in diameter without handle or attachment, which hammer, together with the larger one last mentioned, is largely superseded in some of the smithies by the metal hammer.

The bellows operator sits squatting on a slight platform the height of the bellows, and constantly works the plungers up and down with rhythmic strokes.

Two men at first handle the hot iron -- one, the real blade maker, holds the white-hot metal with long-handled iron pinchers (purchased in Candon) and his helper wields the 30-pound hammer. He stands with legs well apart, grasps the heavy hammer with both hands, and swings it back and forth between his legs. The blow is struck at the downward, backward swing.

These smiths weld iron, and also temper it to make steel. The following detailed picture of a welding observed in a Baliw.a.n.g smithy may be duplicated there any day. The two pieces of iron to be welded were separately heated a dull red. One was then laid on the other and both were cooled with water. Wet earth, gathered for the occasion at the side of the smithy, was then put over them; while still covered they were inserted again in the fire. When red-hot they were withdrawn, the little mound of earth covering the two pieces of iron being still in place but having been brought also to a red heat. A few light blows fell on the red ma.s.s, and it was again returned to the fire. Four times the iron was withdrawn and received a few blows with a light hammer wielded by the master smith. On being withdrawn the fifth time half a dozen blows were struck by the helper with the 30-pound hammer. Again the iron was heated, but when removed the sixth time the welding was evidently considered finished, as the shaping of the weapon was then begun. Weldings made by these smiths seem to be complete.

The tempering done by the Igorot is crude, and is such as may be seen in any country blacksmith shop in the States. The iron is heated and is tempered by cooling in a small wooden trough of water. There is great difference in the quality of the steel turned out by the Igorot, even by the same man, though some men are recognized as more skillful than others.

There are four styles of spear blades made by Baliw.a.n.g. The one most common is called "fal-feg'." It is a simple, single-barbed blade, and ranges from 2 inches to 6 inches in length. This style of blade is the most used in warfare, and the smaller, lighter blades are considered better for this purpose than the heavier ones.

The fang'-kao, or barbless lance blade, is next common in use. It is not a war blade, but is used almost entirely in killing carabaos and hogs. There is one notable exception to this statement -- Ambawan has almost no other cla.s.s of spear. These blades range from 4 to 12 or 14 inches in length.

The other two blades, si-na-la-wi'-tan and kay-yan', are relatively rare. The former is quite similar to the fal-feg', except that instead of the single pair of barbs there are other barbs -- say, from one to ten pairs. This spear is not considered at all serviceable as a hunting spear, and is not used in war as much as is the fal-feg'. It is prized highly as an anito scarer. When a man pa.s.ses alone in the mountains anito are very p.r.o.ne to walk with him; however, if the traveler carries a si-na-la-wi'-tan, anito will not molest him, since they are afraid when they see the formidable array of barbs.

Kay-yan' is a gracefully formed blade not used in hunting, and employed less in war than is si-na-la-wi'-tan. Though the Igorot has almost nothing in his culture for purely aesthetic purposes, yet he ascribes no purpose for the kay-yan' -- he says it looks pretty; but I have seen it carried to war by war parties.

The pueblo of Sapao makes superior-looking steel weapons, though many Igorot claim the steel of the Baliw.a.n.g spear is better than that from Sapao. In Quiangan I saw a fang'-kao, or lance-shaped blade made in Sapao, having six faces on each side. The five lines separating the faces ran from the tang to the point of the blade, and were as regular and perfect as though machine made. The best cla.s.s of Sapao blades is readily distinguishable by its regular lines and the smooth and perfect surface finish.

All spearheads are fastened to the wooden shaft by a short haft or tang inserted in the wood. An iron ferrule or a braided bejuco ferrule is employed to strengthen the shaft where the tang is inserted. A conical iron ferrule or cap is also placed on the b.u.t.t of the shaft. This ferrule is often used, as the spear is always stuck in the earth close at hand when the warrior works any distance from home; and as he pa.s.ses along the steep mountain trails or carries heavy burdens he commonly uses the spear shaft as a staff.

The spear shafts are made by the owner of the weapon, it not being customary for anyone to produce them for sale. Some of them are rather attractively decorated with bra.s.s and copper studs, and a few have red and yellow bejuco ferrules near the blade. In some pueblos of the Bontoc area, as at Mayinit, spear shafts are worked down and eventually smoothed and finished by a flexible, bamboo knife-blade machine. It consists of about a dozen blades 8 or 10 inches in length, fastened together side by side with string. The blades lie one overlapping the other like the slats of an American window shutter. Each projecting blade is sharpened to a chisel edge. The machine is grasped in the hand, as shown in fig. 6, and is slid up and down the shaft with a slight twisting movement obtained by bending the wrist. The machine becomes a flexible, many-bladed plane.

Baliw.a.n.g alone makes the genuine Bontoc battle-ax. It is a strong, serviceable blade of good temper, and is hafted to a short, strong, straight wooden handle which is strengthened by a ferrule of iron or braided bejuco. The ax has a slender point opposed to the bit or cutting edge of the blade. This point is often thrust in the earth and the upturned blade used as a stationary knife, on which the Igorot cuts meats and other substances by drawing them lengthwise along the sharp edge. The bit of the ax is at a small angle with the front and back edges of the blade, and is nearly a straight line. The axes are kept keen and sharp by whetstones collected and preserved solely for the purpose. Besao, near Sagada, quarries and barters a good grade of whetstone.

FIGURE 6

Bamboo spear-shaft dresser.

A slender, long-handled battle-ax now and then comes into the area in trade from the north. Balbelasan, of old Abra Province, but now in the northern part of extended Bontoc Province, is one of the pueblos which produce this beautiful ax. The blade is longer and very much slimmer than the Bontoc blade, but its marked distinguis.h.i.+ng feature is the shape of the cutting edge. The blade is ground on two straight lines joined together by a short curved line, giving the edge the striking form of the beak of a rapacious bird. The slender, graceful handle, always fitted with a long iron ferrule, has a process on the under side near the middle. The handle is also usually fitted with a decorated metal ferrule at the tip and frequently is decorated for its full length with bands of bra.s.s or tin, or with sheets of either metal artistically incised.

The Balbelasan ax is not used by the pueblos making it, or at least by many of them, but finds its field of usefulness east and northeast of Bontoc pueblo as far as the foothills of the mountains west of the Rio Grande de Cagayan. I was told by the Kalinga of this latter region that the people in the mountain close to the Cagayan in the vicinity of Cabagan Nuevo, Isabela Province, also use this ax.

In the southern and western part of the Bontoc area the battle-ax shares place with the bolo, the sole hand weapon of the Igorot of adjoining Lepanto, Benguet, and Nueva Vizcaya Provinces.

The bolo within the Bontoc area comes from Sapao and from the Ilokano people of the west coast. The southern pueblo in the Bontoc area, Ambawan, uses the bolo of Sapao to the entire exclusion of the battle-ax. Tulubin, the next pueblo to Ambawan, and only an hour from it, uses almost solely the Baliw.a.n.g battle-ax. Such pueblos as t.i.tipan and Antedao, about three hours west of Bontoc, use both the ax and bolo, while the pueblos further west, as Agawa, Sagada, Balili, Alap, etc., use the bolo exclusively -- frequently an Ilokano weapon.

The Sapao bolo is, in appearance, superior to that of Ilokano manufacture. It is a broad blade swelling markedly toward the center, and is somewhat similar in shape to the barong of the Sulu Moro of the Sulu Archipelago. This weapon finds its chief field of use in the Quiangan and Banawi areas. In these districts the bolo is fitted with an open scabbard, and the bright blade presents a novel appearance lying exposed against the red scabbard. The Igorot manufacturer of the bolo does not make the scabbard, and most of the bolos used within the Bontoc area are sheathed in the closed wooden scabbard commonly found in Lepanto and Benguet.

Pipe production, and smoking

The Igorot of Bontoc area make pipes of wood, clay, and metal. All their pipes have small bores and bowls. In Benguet a wooden pipe is commonly made with a bowl an inch and a half in diameter; it has a large bore also. In Banawi I obtained a wooden pipe with a bowl 8 1/4 inches in circ.u.mference and 4 inches in height, but having a bore averaging only half an inch in diameter.

Nearly all pueblos make the pipes they use, but pipes of clay and metal are manufactured by the Igorot for Igorot trade. I never learned that wooden pipes are made by them for commercial purposes.

The wooden pipe of the area varies from simple tubular forms, exactly like a modern cigar holder, to those having bowls set at right angle to the stem. All wooden pipes are whittled by the men, and some of them are very graceful in form and have an excellent polish. They are made of at least three kinds of wood -- ga-sa'-tan, la-no'-ti, and gi-gat'. Most pipes -- wooden, clay, or metal -- have separable stems.

A few men in Agawa, a pueblo near the western border of the area, make beautiful clay pipes, called "ki-na-lo'-sab." The clay is carefully macerated between the fingers until it is soft and fine. It is then roughly shaped by the fingers, and afterwards, when partially hardened, is finished with a set of five light, wooden tools.

The finished bowls are in three different colors. When baked about nine hours the pipes come forth gray. Those coming out red have been burned about twelve hours, usually all night. The black ones are made by reburning the red bowls about half an hour in palay straw.

Two men in Sabangan and one each in Genugan and Takong -- all western pueblos -- manufacture metal "anito" pipes. To-day bra.s.s wire and the metal of cartridge sh.e.l.ls are most commonly employed in making these pipes.

The process of manufacture is elaborate and very interesting. First a beeswax model is made the exact size and shape of the finished metal pipe. All beeswax, called "a-tid'," used in pipe making comes from Barlig through Kanu, and the ill.u.s.tration (Pl. CVIII) shows the form in which it pa.s.ses in commerce in the area. A small amount of wax is softened by a fire until it can be flattened in the palm of the hand. It is then rolled around a stick the size of the bore in the bowl. The outside of the wax bowl is next designed as is shown in the ill.u.s.tration (Pl. CVIII). A careful examination of the ill.u.s.tration will show that the design represents the sitting figure of a man. He is resting his elbows on his knees and holding his lower jaw in his hands -- eyes, ears, nose, mouth, and fingers are all represented. This design is made in the wax with a small knife. The wax for the short stem piece is flattened and folded around a stick the size of the bore of the stem. The stem piece is then set into the bowl and the design which was started on the bowl is continued over the stem.

When the wax pipe is completed a projecting point of wax is attached to the base of the pipe, and the whole is imbedded in a clay jacket, the point of wax, however, projecting from the jacket. The clay used by the pipe maker is obtained in a pit at Pingad in the vicinity of Genugan. Around the wax point a clay funnel is built. The clay mold, called "bang-bang'-a," is thoroughly baked by a fire. In less than an hour the mold is hardened and brown, and the wax pipe within it has melted and the wax been poured out of the mold through the gate or opening left by the melting point of wax, leaving the mold empty.

A small Malayan bellows, called "op-op'," the exact duplicate in miniature of the double tubular bellows described in the preceding section on "metal weapons," furnishes the draught for a small charcoal fire. The funnel of the clay mold is filled with pieces of metal, and the entire thing is buried in the fired charcoal. In fifteen minutes the metal melts and runs down through the gate at the bottom of the funnel into the hollow, wax-lined mold. Since the entire mold is hot, the metal does not cool or harden promptly, and the pipe maker taps and jars the mold in order to make the metal penetrate and fill every part.

The mold is set aside to cool and is then broken away from the metal core. To-day the pipe maker possesses a file with which to smooth and clean the crude pipe. Formerly all that labor, and it is extensive, was performed with stones.

It requires two men to make the "anito" pipes -- tin-ak-ta'-go. One superintends all the work and performs the finest of it, and the second pumps the bellows and smooths and cleans the pipe after it is cast. The two men make four pipes per day, but the purchaser of an "anito" pipe puts days of toil on the metal, smoothing and perfecting it by cleaning and digging out the design until it becomes really a beautiful bit of primitive art.

When a pueblo wants a few tin-ak-ta'-go it sends for the manufacturer, and he comes to the pueblo with his helper and remains as long as necessary. Ay-o'-na, of Genugan, annually visits t.i.tipan, Ankiling, Sagada, Bontoc, and Samoki. He usually furnishes all material, and receives a peseta for each pipe, but the pueblo furnishes the food. In this way a pipe maker is a journeyman about half the year.

Tukukan makes a smooth, cast-metal pipe, called "pin-e-po-yong'," and Baliw.a.n.g makes tubular iron pipes at her smithies. They are hammered out and pounded and welded over a core. I have seen several of such excellent workmans.h.i.+p that the welded seam could not be detected on the surface.

In the western part of the area both men and women smoke, and some smoke almost constantly. Throughout the areas occupied by Christians children of 6 or 7 years smoke a great deal. I have repeatedly seen girls not over 6 years of age smoking rolls of tobacco, "cigars,"

a foot long and more than an inch in diameter, but in Bontoc area small children do not smoke. In most of the area women do not smoke at all, and boys seldom smoke until they reach maturity.

In Bontoc the tobacco leaf for smoking is rolled up and pinched off in small sections an inch or so in length. These pieces are then wrapped in a larger section of leaf. When finished for the pipe the tobacco resembles a short stub of a cigar. Only half a dozen whiffs are generally taken at a smoke, and the pipe with its tobacco is then tucked under the edge of the pocket hat. Four pipes in five as they are seen sticking from a man's hat show that the owners stopped smoking long before they exhausted their pipes.

Fire making