The American Quarterly Review Part 8

You’re reading novel The American Quarterly Review Part 8 online at LightNovelFree.com. Please use the follow button to get notification about the latest chapter next time when you visit LightNovelFree.com. Use F11 button to read novel in full-screen(PC only). Drop by anytime you want to read free – fast – latest novel. It’s great if you could leave a comment, share your opinion about the new chapters, new novel with others on the internet. We’ll do our best to bring you the finest, latest novel everyday. Enjoy!

Karsten cla.s.ses these several causes of whiteness in the product, in the following order:--

"In conformity with the observations that have hitherto been made, white cast iron is obtained:

"1. By the use of ores that are too easily fusible, or which is the same thing, by an excess of flux, by a want of density in the charcoal, and by too strong a blast, even when the working of the furnace is regular.

"2. By a surcharge of ore, which deranges the action of the furnace, and produces impure cinder, containing uncombined iron.

"3. By boshes of too rapid a slope, and a blast of too great a velocity; and this may occur even where the cinder is pure.

"4. By too low a temperature, even when the cinder is pure, and the furnace works regularly.

"5. By a derangement in the action of the furnace, arising not from a surcharge of ore, but from an irregularity in the descent of the charge.

"6. By the substances contained in the body of the furnace exercising too great a pressure upon those beneath; the heat in this case, concentrated in the hearth, cannot reach the boshes, and the upper part of the furnace; the working may be regular, the cinder and flame may in this case give no sign of derangement.

"7. By too great a breadth in the furnace.

"8. When c.o.ke is used, it may arise from too great a quant.i.ty of ashes, or of fossil charcoal, (anthracite,) being contained in it. The presence of these will keep down the heat of the furnace. An excess of ashes may be remedied, by using the ore and flux in proper proportions to fuse them, but a diminution in the charge must be made; the cinder becomes viscid, and likely to obstruct the descent of the charges.

"9. By an accidental cooling, arising from humidity, and other similar causes."

Among the last may be reckoned the presence of zinc in the ore. This metal, although volatile, is not separated at the temperature given in the process of roasting, nor does it sublime in the upper and cooler parts of the furnace. But, as the ore descends, it pa.s.ses into the state of vapour, and requires for its conversion, great quant.i.ties of heat that becomes latent. It hence cools the lower part of the furnace far more rapidly than even wet coal, or moist ores. The cooling thus caused, may not be effected until the melted metal reach the hearth, and may there cause it to become solid. Thus the solid ma.s.s called a salamander, may, in some cases, be formed; and thus may be explained the fact, that ores of iron that contain the more easily fusible metal zinc, are more liable to interrupt the action of the furnace in this manner, than others. The volatilized zinc rises to the upper part of the furnace, where the heat is often insufficient to retain it in the state of vapour, and is then deposited on the sides. In this position, it will also disturb the action of the furnace.

c.o.ke being more dense than charcoal, will, in its combustion, furnish a more intense heat;--hence it is hardly possible to obtain by a charcoal fire, iron of as deep a colour as may be procured by the use of the former fuel. It will also resist the pressure of far greater weights than charcoal, and hence the proportion of ore may be much greater when it is used; containing more and less fusible earthy matters than charcoal, it requires a greater quant.i.ty of flux.

In the manufacture of cast iron then, c.o.ke gives iron better suited for small castings, for those which require turning or filing, and yields a far greater quant.i.ty from a furnace. Hence arises the very great superiority which Great Britain has, until recently, possessed over most other countries, in those fabrics in which these qualities are valuable; and hence it has been found until lately, in this country, hardly possible to manufacture fine machinery that requires workmans.h.i.+p after it is cast, without the aid of the higher qualities of Scotch iron, which, in these qualities, exceeds even the English. Recently, however, iron fully equal to the best Scotch, but like it wanting in tenacity, has been manufactured at the Bennington furnace in Vermont:--so also at the Greenwood furnace in Orange county, N. Y., and at West Point, iron approaching to the Scotch in softness, but very superior in strength, has been produced. In these cases, the height of the furnace has been carried up to the limits we have before laid down, and powerful blowing cylinders subst.i.tuted for the ancient bellows.

When the pig iron is to be used for re-casting, every effort ought to be used to obtain it of the deepest possible colour. This, as may be seen from what has been already stated, will be effected by keeping the furnace at the highest possible temperature, and exposing the metal to it a sufficient length of time. In effecting this, however, certain defects may arise:--thus a longer exposure to a high heat, will cause the reduction of other oxides that may be present, as of manganese and the metallic bases of the earths; and the iron in becoming more soft, and approaching in fact more nearly to the form of the pure metal, will combine and form alloys with these bases. In this way, it will, as has been stated, become cold short; and to this may be attributed the want of strength in the greater part, if not all, of the British iron. The use of c.o.ke as a fuel, tends to increase this defect, in consequence of the great quant.i.ty of earthy matter it contains.

When the ores are pure, cast iron manufactured by charcoal, is not liable to such a fault. Hence the cast iron of Sweden and the United States, manufactured from the magnetic iron, or, in some cases in this country, from rich haemat.i.tes, has very superior tenacity, insomuch that these two nations have alone been able to use this material in the construction of field pieces. When white iron is obtained from a furnace, it may have two different qualities. The first arises from a mere defect of heat, where all other circ.u.mstances are favourable, and the ore is completely reduced. The second arises when the reduction is not complete, and the separation of the earths and other oxides has not been fully effected. Of all the varieties of cast iron, this latter is by far the worst. It is indeed more easily converted into wrought iron than the other species, but the product is always of very inferior quality; it is rarely or never produced by furnaces fed with charcoal, but may be obtained by accident or design in those where c.o.ke is used, by a surcharge of ore, or by too great a proportion of flux, and sometimes cannot be avoided in warm and moist weather, where the air is rarefied and charged with vapour.

The grey iron obtained by the use of each of the different kinds of fuel, has its own peculiar advantages; that made with c.o.ke possessing, as a general rule, when melted, a higher degree of fluidity which adapts it for more delicate castings; being softer and better suited for fitting; while that manufactured with charcoal, possesses a greater degree of strength. One solitary instance has been quoted, in which a manufacturer of great intelligence has obtained by the use of charcoal, from a very pure ore, a union of both these valuable properties, and another, in which iron as soft as that made with c.o.ke, has been produced by means of charcoal.

In spite of this apparent balance in the properties of the two fuels, the introduction of c.o.ke into the art of reducing iron has been attended with the most important advantages. These lie in the superior economy of the process, and in the enormous quant.i.ty of the product. The manufacture of iron by charcoal is limited, by the growth of the forests, which replace themselves only at distant periods, by the large s.p.a.ce they occupy, and the consequent labour of transportation; by the cost of cutting the wood and preparing the coal; and finally, even when the fuel can be obtained in abundance, and at small cost, the burden of the furnace, and the heat obtained in a given s.p.a.ce are less than when c.o.ke is used, and the quant.i.ty of metal yielded is in consequence comparatively small. The c.o.ke furnaces of Great Britain, have therefore supplied cast iron in such abundance and at such diminished prices as to have brought it into use for a great variety of purposes, to which, until recently, it was hardly considered applicable.

In England, as in other countries, charcoal was the only fuel at first used; and after bloomeries had been in vogue for centuries, the blast furnace was introduced from the sh.o.r.es of the Rhine. For many years the growth of the forests proved sufficient to supply the demand, but at length the increase of population caused them to be encroached upon by cultivation; the growth of the manufacture was first prevented, and finally, almost extinguished.

The method by charcoal appears to have reached its acme of prosperity, at the close of the reign of the First James, when the furnaces of the kingdom yielded 180,000 tons of pig iron. About this period, Dudley first proposed the use of pit coal; but the time had not yet arrived in which it was absolutely necessary to seek for a new process, in consequence of the failure of the old one.

In 1745, or in the course of one hundred and thirty years, the forests had been so far encroached upon, that the product of the furnaces had fallen to 17,000 tons per annum, and in 1788, the quant.i.ty made with charcoal had dwindled as low as 13,000 tons. At this epoch, c.o.ke was introduced into blast furnaces, and in eight years the whole quant.i.ty produced by both methods had mounted up to 150,000 tons, or increased more than tenfold.

At nearly the lowest ebb of the British manufacture, the art of preparing iron was introduced into her then provinces, the present United States; and in 1737 it was attempted to obtain permission to introduce the product into England. The attempt failed, and in 1750 an act was pa.s.sed to protect the exportation of English iron to America, and to prevent the establishment of forges. Had the other policy prevailed, England would probably have seen her manufacture of iron transferred to the United States, and with great immediate advantage both to herself and her then most valuable colony; but she would probably have seen herself at the present day degraded from her high stand in the scale of nations, to the secondary place in which the extent of her territory would keep her, were it not for the superiority of her manufacturing industry, of which iron is the basis. The quant.i.ty of iron now produced in England, exceeds that furnished by the rest of the world united, and does not fall short of 800,000 tons. It has a value even in its raw state of near four millions sterling, and is of far greater intrinsic worth, in consequence of the spur which its abundance gives to every other branch of industry.

Bar iron is at the present day princ.i.p.ally manufactured from the pig.

The process originally used for this purpose is called refining. The fire in which it is performed is a forge, similar in form and character to that employed in blooming. In blooming, the iron must be reduced, combines with carbon, and is subsequently decarbureted; while in the refining, the latter part of the operation alone remains. In this last process, while the carbon is burning away, the metallic bases of the earths are then oxidated, combine with oxide of iron, and form a vitreous substance. Hence, when it is carefully conducted, by far the greater part of the impurities contained in the cast iron may be removed. Refined iron, if made from ore of equal purity, is not inferior in tenacity to bloomed, and is superior in other respects, being more h.o.m.ogeneous, free from pins, and more easily treated by the smith. As a general rule, it is also less costly, that is to say, the same quant.i.ty of charcoal and workmans.h.i.+p will furnish a greater quant.i.ty of refined iron. It requires, however, a much greater capital, and the labour of transporting the coal from the greater distances which the increased consumption of a single blast furnace and several refineries will demand, may swell the cost of that article. A bloomery fire does not require more than 2000 acres of woodland, while a blast furnace will use the charcoal of 5000. Thus it happens, that it may be more advantageous to spread a number of bloomeries over a given district of country, than to unite a blast furnace and an equal number of refineries in a single place. The celebrated iron of Sweden and Russia is refined, and our country furnishes iron prepared in the same manner not inferior in quality. The principle objection to the process is the great expense of the fuel employed, in the successive heats to which the iron must be exposed in drawing it into bars, after the processes of conversion and the separation of impurities have been effected.

As charcoal became scarce in England, it was attempted to employ c.o.ke in lieu of it, in the refineries. This, however, constantly failed, in consequence of the great intensity of the heat, by which the pig was melted suddenly instead of being exposed to the blast, long enough to burn away the carbon. Reverberatory furnaces were next tried, and with partial success, but a combined process has finally been introduced which has been successful and which is called, from a part of the operation, the method of _puddling_.

The manufacture of wrought iron, by means of bituminous coal, is executed at three successive processes, and is facilitated by very great improvements in the machinery. Where hammers are still used, they are much increased in weight, and driven with greater velocity; but by far the greater part of the operation of drawing the bars is effected by means of rollers. The plan of these is in some measure borrowed from the slitting mill, in which bar iron is reduced into rods and thin rolls for various uses. These rollers are in sets, composed each of two of equal diameter, lying in a horizontal position, and placed one vertically above the other. Grooves corresponding to each other are cut in the two rollers, between which the heated iron is drawn by their revolution, and forced to a.s.sume a section that just fills up the two grooves. By pa.s.sing in succession through grooves gradually decreasing in size, any form or magnitude may be given to the bars; and the operation is so rapid, that the bar may be drawn from the loup at a single heat.

The first operation to which the pig iron is subjected, consists in melting it in a fire called a finery, similar in form and character to the bloomeries and refineries of which we have spoken, but in which the fuel is c.o.ke. The melted metal is drawn off by tapping the furnace from beneath, and is cast into thin plates. In this way it a.s.sumes the characters of the white cast iron, which has been described as formed, when the reduction of the metal is complete, a form that cannot be given when the blast furnace in which it is made is supplied with c.o.ke. The rapidity of the cooling is increased, by throwing water on the surface of the plates. It thus appears, that this operation is adopted in order to bring the cast iron into a slate that it may often a.s.sume when manufactured by charcoal, and which cannot be given to it by c.o.ke. In conformity with this view of the subject, it has been found, that when wrought iron is manufactured by puddling, from American pig prepared by charcoal, this preliminary operation is unnecessary.

The fine metal, obtained in the manner we have described, is next broken into pieces, and subjected to heat in a reverberatory furnace. A rapid heat is given at first to liquefy the iron, and is then diminished by means of dampers; the melted ma.s.s is violently stirred to expose it to the action of air and heat, by which the carbon is burnt away, and a part of the oxides of iron and the earthy bases combined and vitrified; as the carbon is separated, the metal gradually loses its liquidity, and finally dries, or a.s.sumes the consistence of sand: this shows that the carbon is separated, and the iron has a.s.sumed its malleable nature. The addition of water aids the oxidation of the several substances, and facilitates the process. The heat is again increased, and the metal collected under it, and rolled together into parcels suited to the action of the drawing machinery, and to the size of the bar that is to be made; these are pressed together, and a partial union takes place among their particles. When they have attained a white heat, they are withdrawn in succession. In some cases, where the number of puddling furnaces is great, they are immediately carried to the rollers and drawn down. But where quality is more regarded than quant.i.ty, they are first subjected to the action of the hammer, and finally rolled. The latter process has the advantage of separating more completely the vitrefied oxides, than can be done by rolling alone, but it will often require a second heat, which is given in a forge fire called the _chaffery_. When rollers are used alone, a minute and half is sufficient to form the bar; and a power of thirty houses will roll two hundred tons per week.

The iron in this state is still of very inferior quality, although its external appearance may be good. It is, notwithstanding, sometimes thrown into the market, and this has given rise to the impression that prevails in this country of the bad quality of English rolled iron. It may, however, be used in some cases, where it need not be fas.h.i.+oned by forging; thus, where it requires no more than to be cut into lengths, or where the original bars will answer the purpose, its cheapness may recommend it. Iron for rail-roads is of this quality; and the punching of holes, by which it may be fastened down, is effected by a simple addition of steel teeth, at proper distances, to the last groove through which it is pa.s.sed. In this form, ready to lay down, rail-road iron may be s.h.i.+pped from England at the low price of 7_l._ 10_s._ sterling per ton; and a similar quality in the simple bar may probably be afforded at about 7_l._ We have never heard of its being sold so low as is stated in the evidence before the Committee of Congress, say 5_l._ 5_s._ There was, however, a period, when an excess of production, caused by a compet.i.tion between the manufacturers of Wales and Staffords.h.i.+re, entailed ruin on many of them, and their articles were sold far below the price of production. The price which we have stated is lower than that which has recently been paid in England for rail-road iron, and is that of some s.h.i.+pped from Liverpool, 1st March, 1831, when a considerable fall had taken place.

In order to render the iron which has undergone this process merchantable, it is subjected to the third of the operations which we have enumerated. For this purpose, the bars are made from three to four inches in breadth, and half an inch in thickness. These are cut into lengths, proportioned to the weight of the bar of finished iron that is to be made, and piled together by fours, in a reverberatory furnace, similar in character to the puddling furnace. Here they are exposed to a white heat, by which the four pieces of each pile are made to adhere; they are then withdrawn, and subjected to rollers similar to those used after the puddling process, but of more careful workmans.h.i.+p. The cost of finis.h.i.+ng bar iron in this way, when the pig is made by the manufacturer himself, as ascertained upon the spot by Dufrenoy and de Beaumont, is, in Wales, 8_l._ 15_s._, in Staffords.h.i.+re, 9_l._ 12_s._ The cost of making pig iron in Wales is 4_l._ 7_s._, or about half that of the finished bar iron, and in Staffords.h.i.+re 5_l_ 2_s._

The iron prepared by the three processes of which we have spoken, although merchantable, and suited for various common purposes, is still far from good. We give the characters by which it is distinguished, from the work of Karsten:--

"The iron prepared in the English manner, appears dense and exempt from cracks and flaws. But this goodness is only apparent; the uniform pressure to which the bars are subjected at every point, masks their defects. If a piece of this kind be taken, that in its fracture appears dense and h.o.m.ogeneous, and it be heated in order to be drawn out under a common forge hammer, it dilates and exhibits numerous flaws, that sometimes increase to such a degree, that the bar will fall to pieces under the hammer. It is probable that the cause of this phenomenon is due to the scoriae, which, in this mode of working, remain mixed in the ma.s.s."

The translator adds:--

"It is not however true, that the English method of itself, injures the quality of iron,--experience has proved the contrary: it appears that soft irons lose their harshness in this operation, and become better for many uses."

It may therefore be inferred, that, when the English method is applied to pig iron, that would produce a good wrought metal by the process with charcoal, it will produce one that is equally good by means of coal, but that the latter is capable of hiding the apparent defects of even the worst iron.

The inferiority of the puddled iron is well understood in England, and therefore when it is to be used for chain cables and anchors, it is again heated, and rolled a third time, its price will be then raised to 10_l._ 10_s._ Another quality still superior, is made by uniting sc.r.a.ps of the better qualities that we have mentioned, into loups in the puddling furnace, drawing it in the puddle rolls, balling or piling, and again rolling. Its cost will thus be raised to 12_l._ Even this is yet inferior to Swedes and Russia iron, which sell in the English market from 13_l._ to 15_l._ sterling per ton. For particular purposes in the fabrication of machinery, charcoal is still used in England, in manufacturing a very small quant.i.ty of iron, but of very superior quality; this, we have recently understood from good authority, is sold as high as 22_l._ per ton.

Thus it appears that the manufactories of England produce five different descriptions of wrought iron, four of which bear a lower price, and are therefore inferior in quality to those of Sweden and Russia, and, consequently, to the best American iron. No more than one of these, and that the lowest in quality, is usually s.h.i.+pped to this country, and it was the influx of this cheap and almost worthless material, which in 1816 and '17, completely prostrated the American manufacture. Under a protecting duty, it has again revived, but has not reached its former level. New capital has been invested in it under this protection, and it would be a breach of faith suddenly to withdraw it. Still sound policy would dictate that this protection should not be perpetual, provided it can be incontestably proved that it bears so hard upon other branches of industry, as to injure the country through them to a greater extent, than the benefit it derives from the manufacture of iron. But this is far from being the case. The manifest and habitual policy of our government, is to derive its revenue indirectly through the custom house, instead of seeking it in direct taxation. When these duties descend to a level with the minimum expenditure, they cannot be considered burthensome, because they in fact replace revenues that must be drawn from other sources. If, for instance, the iron employed in a specific object, appear to cost more than in some other country, that object may yet be afforded cheaper with us, in consequence of its maker being free from other burthens, which the repeal of the duty on iron, would throw upon him as a necessary subst.i.tute. If then our furnaces and forges, when a sufficient capital shall be invested in them under a protecting duty, can afford iron as cheap as it can be imported from other countries, under a minimum of duty, it cannot in truth be said, that this raw material will enhance the price of the articles manufactured from it. Let us see whether there be any reasonable prospect that we shall have iron produced in our own country, which will compete with foreign iron of equal quality, paying a duty of 25 per centum. If this be the case, the profits arising from the present protection, must, in a few years, call forth such production as will reduce the price to a proper level.

The best grey pig iron of American manufacture, superior in strength, and equal in all other respects to the Scotch, is now sold in the New York market at $45 per ton. Good grey iron of the usual character, is worth $35 per ton, and there is no question that forge pig could be obtained by the manufacturer of bar iron, for $25. If it were even to cost $30, it is still cheaper than Staffords.h.i.+re iron, far less fit for the purpose, can be imported. The Muirkirk iron, so valuable for the casting of machinery, used to cost to import it, at the present rate of duty, $55 and $56. The Bennington furnace commenced the compet.i.tion with it at this rate, but has been compelled, after driving the Scotch iron from the market, to sell at $45, which is as low as the foreign could be imported at a minimum duty.

Taking the cost of forge pig at $25, the price of converting into bars by charcoal, would be, according to the Philadelphia memorial, $18, and the ton of wrought iron ought to cost no more than $43. We however believe that this cost is far underrated, and that even by the aid of rollers in a part of the process, iron of the best quality could not be produced under $50. This is as cheap as merchantable English puddled iron can be imported, paying 25 per cent. duty. But, even if the pig cost $35, and the wrought iron, $60, it is still cheaper than the English iron, worth in that market 10_l._ 10_s._ can be imported; and the latter is the cheapest which can be obtained in that country, suitable for the manufacture of anchors and chain-cables. At the present moment, however, iron cannot be produced so cheaply, for the forges and furnaces may be considered as in a great measure new, and undergoing all the difficulties of new establishments. Capital above all is wanting, from a want of confidence in the success of the enterprize, growing out of a fear of the repeal of the duty, and the recollection of the former catastrophe; and even credit, so essential where capital is deficient, is at a low ebb. Hence, if profit be made, it rather centers in the capitalist who makes the advances, than in the maker. Thus we have known iron in the bloom, sold at $45 per ton; and, when finished for the market by rolling, bring $100. The latter price, however, could not long be maintained, and has descended to $75 and $80, which still leaves the greater part of the profit to the capitalist.

But we are of opinion, that the manufacture of iron by charcoal is not that to which our country should look for its final supply. It is at best a precarious resource, and its production must diminish with the advance of agriculture, and the consequent demand, while every increase in the price of land must raise the cost. It is then to a total change in the seat and mode of manufacture, that we are to be hereafter beholden for the supply of this first necessary of civilized life. A change will first take place in the sites of the two branches; pig iron will continue to be manufactured by charcoal, and the bar converted by coal. For this the great coal field of Pennsylvania will afford the earliest facilities. No doubt can be entertained that the more freely burning varieties of anthracite will work well in the puddling furnace, as they have been successfully employed in the rolling and slitting of bar iron. When the same species of coal is mixed with charcoal in the blast furnace, it produces excellent forge pig, and thus the two species of fuel may be advantageously united, although the coal alone will not answer the purpose. The value of this coal in the mine and the cost of raising it, is as yet less than that of bituminous coal in any part of Europe, and thus we cannot avoid concluding that when it shall be brought into use, our manufacturers might compete with the English even if unprotected by duty. Our fields of bituminous coal are yet too distant from dense population, and too far removed from easy communication, to be looked to at present, but unless modes be invented by which the anthracite coal can be used without mixture in the blast furnace, these will become the ultimate seats of the manufacturing industry of the United States.

But for reducing the price of iron, by compet.i.tion within our country, to a level with that of other countries, capital is required, and to divert it to this purpose, the capitalist must feel a.s.sured that he shall derive a certain profit from its investment, and that he shall be subjected to no fluctuations in price and still more in demand, from a vacillating course in the government. The establishment of works so perfect as to compete in their manipulations with the English, is a serious business, and till they be established in numbers, we must be dependent on foreign countries for no small proportion of the important article of iron that we consume. A forge for manufacturing puddled iron cannot be profitable unless its machinery be kept in regular employ, for the cost of that will be the same in all cases. This constant employment cannot be given by fewer than eighteen reverberatory furnaces, and the first cost of the works will not be less than $100,000, of which the machinery alone costs $50,000. To supply an establishment of this magnitude with pig, would employ three blast furnaces working with c.o.ke, or six with charcoal, the cost of which would reach at least $120,000.

The value of the manufactured article would not fall short of a million of dollars, and would require to carry it on a floating capital of not less than $250,000. Thus it appears that a system of works for the manufacture of iron, which should compete to advantage with those of England, would find employment for a capital of half a million of dollars, even with the advantage of credit, and the ready conversion of its securities into cash through the banks. So long, then, as the policy of our government is unsettled, we can hardly expect that so vast an operation can be undertaken either by individual or by corporate funds.

A division of the business has been indeed attempted; there is more than one puddling forge in the United States that relies upon the purchase of pig for its supply. These unquestionably do a fair and profitable business, but do not act to the same advantage as they would were the two branches of the manufacture united. The chief difficulty under which they labour is, that they must consult, in their location, convenience in the supply of the raw material, and must therefore neglect what would in the abstract be the most important consideration, the supply of fuel.

Thus, at least one of the puddling forges of which we have spoken, is compelled to use imported fuel, and none are situated where alone the nation could derive essential benefit from them, immediately over a rich bed of coal.

It is not pretended to maintain that the present duties on iron are not too high in general for a permanent rate, and that the distribution of their rates is not injudicious. All that we would contend for is, that there shall be no sudden change in the principle, by which a valuable branch of industry would be at once destroyed beyond the possibility of re-establishment. We have been able to discover no argument in the blacksmith's pet.i.tion, or in the report of the majority of the committee of the Senate, in favour of an entire repeal of duty on raw iron, that does not apply equally to the articles manufactured from it; and we presume that those useful and respectable mechanics would think their principles carried a step too far, should they be made to bear upon the fabrics of their own industry. We are willing, in addition, at once to admit that where the scale has been founded upon improper principles, it ought to be instantly changed.

To attain the first object, as we presume it will not be contended that iron shall ever be imported free of duty, while the nation needs a revenue to meet its current expenditure, let a minimum be fixed beyond which it shall not descend, and which will, evidently, when correctly viewed, place our consumers of iron on an equal footing with those who pay direct taxes in other countries; to this minimum, after a certain definite period, let the duty be gradually and almost insensibly reduced. Less than twenty-five years would probably be insufficient to effect this without incurring a wanton waste of property. We are aware, indeed that our national legislature can perform no act which its successors may not annul, but a hearty concurrence on the part of Mr.

d.i.c.kerson and Mr. Hayne, representing, as they do, the two great opposing interests in this question, would be a pledge that might be acted upon by capitalists. The expediency of investment would then become a subject of strict calculation, and we do not fear the result.

As to the injudicious adjustment of the scale, the higher rates of duties fall upon articles, which under present circ.u.mstances are not capable of being protected, except by actual prohibition. These are the small forms of rod and round iron, hoops and sheets. The introduction of the joint operations of puddling and rolling, has altogether changed the manner of manufacturing these in Europe; they are now, with the exception of sheets, made directly from the pig, by as few operations as common bars; our own puddling forges are adopting the same method, and so soon as they are capable of supplying the market, must drive out the articles of these descriptions, made by those who use merchantable bar iron, and roll it down or slit it. The slitting and rolling mills which are conducted on this last principle, are therefore beyond the reach of support. The inequality in the duty too, is more than the cost of performing the additional operation upon the bar, and is hence rather injurious than otherwise, to the interest of the producers of the raw iron, while it bears with great severity upon those consumers who are themselves manufacturers of hardware. The duty upon these articles should then be adjusted so as to bear the proportion to that upon bar iron, which their values do in the foreign market whence they are derived.

On the other hand, there are certain articles, of which the price of the raw material, whether cast or bar iron, forms the chief value, and which are actually convertible to the same purposes with their base. On these, there can be no question, that every consideration of policy and justice requires that the duty should be raised. Several articles of this description are enumerated by the Philadelphia memorialists, where the fabric is of wrought iron; and it is obvious that there are others, made at a blast furnace from the metal at its first reduction, which might be used as a substance for pig. Such articles, however, cannot be numerous; for iron is, after all, a material of such low price, that it can be hardly wrought into any important species of goods, in which the value of the workmans.h.i.+p will not exceed the cost of the raw article. The _ad valorem_ duty must, therefore, in most cases, be an efficient protection, both to the maker of iron and the manufacturer of hardware.

Where however it is not, an easy principle will restore the irregularity; for it is only necessary to collect the duties by weight, and affix to them the same rates which the raw iron pays.

The plan we have proposed, of continuing the present duty for a limited time, is consistent with the policy of all civilized nations, who do not hesitate to grant monopolies for definite periods to the inventers of new processes in the arts, and most of whom give equal encouragement to those who merely introduce them. Our government, indeed, has never adopted the latter principle, but it may well be questioned whether it have not in this way prevented the introduction of many important branches of manufacture. The former has been adopted in its full extent, and its utility is unquestioned. If, then, it be sound and highly profitable policy, to grant a monopoly to individuals for limited periods, thereby excluding our own citizens from advantages which in most cases lie open to foreign countries, much more will it be politic and profitable, to protect a whole cla.s.s of our own artificers from external compet.i.tion for a similar period, leaving the price to be lessened by the compet.i.tion that security, from a change of system, will infallibly create. The usual limit of a patent right having been found efficient in drawing forth inventive talent, an equal duration of protecting duty might be depended upon as sufficient to induce the investment of capital in a business whose processes are understood, and in relation to which strict calculations can be made. But these protecting duties must not suddenly cease; for if they do, a spirit of speculation, both on our part and on that of foreign merchants, would infallibly throw into the market an excess of the article from abroad; and although the importer might not be exempted wholly from the ruinous consequence of the over trade, infallible destruction would visit our own establishments. Such was the case in 1816 and 1817. The losses on the iron trade were not confined to our own manufacturers, but visited the importers, whether British or American, and reached in their remote consequences, but with diminished effect, the forges and furnaces of England. The latter were, however, protected by the whole capital of the merchant, which was annihilated before the ruin could reach them, while the American establishments were directly exposed to it. The adventurous spirit of British commerce, in fact, produced on this occasion an effect similar to that which the people of the continent have erroneously ascribed to the government of that country. New markets are no sooner opened, than loads of British fabrics are thrown in, and necessarily sacrificed; those who see no more than their own domestic misfortunes, naturally ascribe to the policy of the nation, what is in fact the misjudged enterprise of rash individuals. The effect has, however, been in many cases the same, as if the act had been the result of a deliberate national system; for the foreign industry has been often prostrated, while the capital of the British has enabled it to bear the momentary shock, and then to replace its losses by the undivided enjoyment of the disputed market.

Having proposed that the duty on imported iron, after remaining for a limited period at its present rate, should thereafter be gradually reduced to a minimum, it remains that we should examine at what rate this minimum should be fixed. This we conceive may be adjusted merely as a question of revenue. Raw iron being a material of great weight, in proportion to its value, cannot be smuggled; it will therefore bear, among all articles, nearly the highest rate of impost, in proportion to its cost. This rate of duty should be calculated upon the higher qualities of wrought and bar iron, and be applied equally to all the different shades of each article. For a wise policy would dictate that the import of the inferior sorts should be more impeded than that of the best descriptions. This is a.n.a.logous to the system at present sanctioned by law, and is dictated by sound views. Fixing then the minimum duty at about twenty-five per cent, on the value of the better qualities of the two varieties of raw iron, it will amount to about seven and a half dollars on the pig, and fifteen dollars on the bar. To this limit we believe that the duty may be finally reduced, without causing injury to our own trade, provided the present duties remain in force for fourteen years, and be then gradually lessened to this a.s.sumed minimum.

It will be seen, that our views neither go the whole length of those of the sticklers for either system, the _tariff_ or the _anti-tariff_,--and we fear, that, at the moment, they will be equally objectionable to the advocates of both. We however cannot but believe, that they are founded upon sound and just principles. We give the fullest meed of praise to that policy which has recalled into existence by a protecting duty, the most important of manufactures, because the basis of all the rest. But, we cannot see that it would be judicious to continue this duty, after it shall have produced its whole vivifying effect. While, therefore, on the one hand, it appears to be no more than a fulfilment of a solemn contract, that the manufacture of iron shall be protected, we cannot urge that that protection should continue forever; and, in relation to the diminution of duty, we conceive that it ought to be gradual, and not sudden. Modified in conformity with such principles, we conceive that a "judicious tariff" might be rendered popular in all parts of the Union.

The American Quarterly Review Part 8

You're reading novel The American Quarterly Review Part 8 online at LightNovelFree.com. You can use the follow function to bookmark your favorite novel ( Only for registered users ). If you find any errors ( broken links, can't load photos, etc.. ), Please let us know so we can fix it as soon as possible. And when you start a conversation or debate about a certain topic with other people, please do not offend them just because you don't like their opinions.


The American Quarterly Review Part 8 summary

You're reading The American Quarterly Review Part 8. This novel has been translated by Updating. Author: Various already has 563 views.

It's great if you read and follow any novel on our website. We promise you that we'll bring you the latest, hottest novel everyday and FREE.

LightNovelFree.com is a most smartest website for reading novel online, it can automatic resize images to fit your pc screen, even on your mobile. Experience now by using your smartphone and access to LightNovelFree.com

RECENTLY UPDATED NOVEL