The Theory and Practice of Model Aeroplaning Part 38

1 0

=Microscopic Internal Flaws, Inducing Fracture in Steel.= By T.

ANDREWS. 8vo, sewed. (_1896_)

2 0

=Relations between the Effects of Stresses= slowly applied and of Stresses suddenly applied in the case of Iron and Steel: Comparative Tests with Notched and Plain Bars. By P. BREUIL. 23 plates and 60 illus. 151 pp. 8vo. (_1904_)

_net_ 8 0

=Bra.s.sfounders' Alloys.= By J.F. BUCHANAN. Ill.u.s.trated, 129 pp.

crown 8vo. (_1905_)

_net_ 4 6

=Foundry Nomenclature.= The Moulder's Pocket Dictionary and concise guide to Foundry Practice. By JOHN F. BUCHANAN.

Ill.u.s.trated, 225 pp. crown 8vo. (_1903_)

_net_ 5 0

=American Standard Specifications for Steel.= By A.L. COLBY.

Second edition, revised, 103 pp. crown 8vo. (_New York, 1902_)

_net_ 5 0

=Galvanised Iron=: its Manufacture and Uses. By J. DAVIES. 139 pp. 8vo. (_1899_)

_net_ 5 0

=Management of Steel.= By G. EDE. Seventh edition, 216 pp.

crown 8vo. (_1903_)

5 0

=Galvanising and Tinning=, with a special Chapter on Tinning Grey Iron Castings. By W.T. FLANDERS. 8vo. (_New York_)

_net_ 8 6

=Cupola Furnace.= A practical treatise on the Construction and Management of Foundry Cupolas. By E. KIRK. Third edition, 78 illus. 450 pp. demy 8vo. (_New York, 1910_)

_net_ 15 0

=Practical Notes on Pipe Founding.= By J.W. MACFARLANE. 15 plates, 148 pp. 8vo

12 6

=Atlas of Designs concerning Blast Furnace Practice.= By M.A.

PAVLOFF. 127 plates, 14 in. by 10 in. oblong, sewed.

(_1902_)

_net_ 1 1 0

=Alb.u.m of Drawings relating to the Manufacture of Open Hearth Steel.= By M.A. PAVLOFF.

Part I. Open Hearth Furnaces. 52 plates, 14 in. by 10 in.

oblong folio in portfolio. (_1904_)

_net_ 12 0

=Metallography Applied to Siderurgic Products.= By H. SAVOIA.

Translated by R.G. CORBET. With 94 illus. 180 pp. crown 8vo.

(_1910_)

_net_ 4 6

=Modern Foundry Practice.= Including revised subject matter and tables from SPRETSON'S "Casting and Founding." By J. SHARP.

Second edition, 272 illus. 759 pp. 8vo. (_1905_)

_net_ 1 1 0

=Roll Turning for Sections in Steel and Iron.= By A. SPENCER.

Second edition, 78 plates, 4to. (_1894_)

1 10 0

METRIC TABLES.

=French Measure and English Equivalents.= By J. BROOK. Second edition, 80 pp. fcap. 32mo, roan. (_1906_)

_net_ 1 0

=A Dictionary of Metric and other useful Measures.= By L.

CLARK. 113 pp. 8vo. (_1891_)

6 0

=English Weights, with their Equivalents in kilogrammes per cent.= By F.W.A. LOGAN. 96 pp. fcap. 32mo, roan. (_1906_)

_net_ 1 0

=Metric Weights with English Equivalents.= By H.P. MCCARTNEY.

84 pp. fcap. 32mo. (_1907_)

_net_ 1 0

=Metric Tables.= By Sir G.L. MOLESWORTH. Fourth edition, 95 pp.

royal 32mo. (_1909_)