Illustrated Catalogue of Cotton Machinery Part 4

E1 Front Lap Calender Roll Driving Gear, 12 T.

E2 Bottom Cross Shaft Gear, driving Calender Rolls and Top Cross Shaft, 14 T.

F Large Double Intermediate, driving Top Cross Shaft, 50 T.

F1 Small Double Intermediate, driving Bottom Calender Roll, 27 T.

F2 Bottom Calender Roll, 7 in. dia.

G Top Cross Shaft Gear, 30 T.

G1 Side Shaft Driving Bevel Gear, 24 T.

H Side Shaft Bevel Gear, Calender End, 24 T.

H1 Side Shaft Bevel Gear, Feed End, 28 T.

I Compound Intermediate Bevel Gear, 28 T.

I1 Compound Intermediate Gear, driving Bottom Feed Roll, 37 T.

J Bottom Feed Roll, 2 in. dia.

{42}

J1 Bottom Feed Roll Gear, 33 T.

J2 Cage Section Top Stripping Roll Driving Gear, 9 T.; 8 T.

Gear may be used to vary speed.

K Cage Section Top Stripping Roll Intermediate Gear, 52 T.

L Cage Section Top Stripping Roll Gear, 14 T.

M Cage Section Bottom Stripping Roll Gear, 14 T.

M1 Cage Section Bottom Cage Driving Gear, 23 T.

N Cage Section Bottom Cage Intermediate Gear, 20 T.

O Cage Section Bottom Cage Gear, 181 T.

O1 Cage Section Top Cage Gear, 181 T.

P Front Lap Calender Roll, 9 in. dia.

P1 Front Lap Calender Roll Gear, 53 T.

P2 Back Lap Calender Roll Driving Gear, 24 T.

Q Back Lap Calender Roll Intermediate Gear, 22 T.

R Back Lap Calender Roll Gear, 24 T.

R1 Back Lap Calender Roll, 9 in. dia.

S 3d Calender Roll Gear, 21 T.

S1 3d Calender Roll, 5-1/2 in. dia.

T 2d Calender Roll Gear, 22 T.

T1 2d Calender Roll, 5-1/2 in. dia.

U Top Calender Roll Gear, 23 T.

U1 Top Calender Roll, 5-1/2 in. dia.

V Calender Section Top Stripping Roll Intermediate Gear, 17 T.

V1 Calender Section Top Stripping Roll Intermediate Gear, 17 T.

W Calender Section Top Stripping Roll Gear, 14 T.

X Calender Section Bottom Stripping Roll Gear, 14 T.

X1 Calender Section Bottom Cage Driving Gear, 23 T.

Y Calender Section Bottom Cage Intermediate Gear, 20 T.

Z Calender Section Bottom Cage Gear, 181 T.

Z1 Calender Section Top Cage Gear, 181 T.

{43}

BREAKER LAPPERS.

DRAFT CALCULATIONS.

[Ill.u.s.tration]

{44}

[Ill.u.s.tration]

INTERMEDIATE OR FINISHER LAPPER.

SIDE VIEW OF GEARING

{45}

[Ill.u.s.tration]

INTERMEDIATE OR FINISHER LAPPER.

SIDE VIEW OF GEARING

{46}

[Ill.u.s.tration]

INTERMEDIATE OR FINISHER LAPPER

PLAN VIEW OF GEARING

{47}

INTERMEDIATE AND FINISHER LAPPERS.

ALPHABETICAL REFERENCES TO DRAWINGS.

A Main Driving Pulley, 16 in. dia. x 4-1/4 in. face; 5-1/4 in. face for Two-beater Machine.

A1 Beater Driving Pulley, 30 in. dia. x 4-1/4 in. face, for 18-in.

Rigid Beater; 22 in. dia. x 4-1/4 in. face for Carding Beater.

B Beater Pulley, 9 in. dia. x 4-1/4 in. face (occasionally 10 in. dia.) B1 Feed Pulley, 3 in. to 13 in. dia. x 2-1/4 in. face; advancing by 1/2 in. increments.

B2 Calender Section Fan Driving Pulley, 6 in. dia. x 2-1/4 in.

face for 18-in. Rigid Beater, and 8 in. dia. x 2-1/4 in.

face for Carding Beater.

B3 Calender Fan Pulley. 8 in. dia. x 2-1/4 in. face.

C Driving Pulley for Side Shaft, etc., 12 in. dia. x 2-1/4 in. face.

C1 Evener Cross Shaft Bevel Gear, 27 T.

C2 Evener Cross Shaft Change Gear, 55-35 T; diminis.h.i.+ng by one tooth.

D Side Shaft Bevel Gear, Feed End, 27 T.

D1 Side Shaft Bevel Gear, Calender End, 18 T.

E Large Clutch Bevel Gear, 60 T.

E1 Small Clutch Gear, 17 T.

F Calender Cross Shaft Driven Gear, 96 T.

F1 Front Lap Calender Roll Driving Gear, 12 T.

F2 Calender Cross Shaft Gear, driving Calender Rolls, 14 T.

G Large Double Intermediate, driving Bottom Calender Roll, 50 T.