Illustrated Catalogue of Cotton Machinery Part 5

G1 Small Double Intermediate, driving Third Calender Roll 27 T.

G2 Bottom Calender Roll, 7 in. dia.

H 3d Calender Roll Gear, 21 T.

H1 3d Calendar Roll, 5-1/2 in. dia.

I 2d Calender Roll Gear, 22 T.

I1 2d Calender Roll, 5-1/2 in. dia.

J Top Calender Roll Gear, 23 T.

J1 Top Calender Roll, 5-1/2 in. dia.

K Top Stripping Roll Intermediate Gear, 17 T.

K1 Top Stripping Roll Intermediate Gear, 17 T.

L Top Stripping Roll Gear, 14 T.

{48}

M Bottom Stripping Roll Gear, 14 T.

M1 Bottom Cage Driving Gear, 23 T.

N Bottom Cage Intermediate Gear, 20 T.

O Bottom Cage Gear, 181 T.

O1 Top Cage Gear, 181 T.

P Bottom Cone Change Gear, 35-55 T; advancing by one tooth.

P1 Bottom Cone, driving Top Cone. Letters also represent diameters near the middle of Cones.

Q Top Cone.

Q1 Worm Shaft Driving Spiral Gear, 9 T.

R Worm Shaft Spiral Gear, 9 T.

R1 Worm Shaft Worm, double threaded, right hand; equivalent to Gear having two teeth.

S Worm Gear, 78 T.

S1 Feed Roll and Ap.r.o.n Roll Driving Gear, 12 T.

T Feed Roll, 3 in. dia.

T1 Feed Roll Gear, 24 T.

U Ap.r.o.n Roll Gear, 29 T.

V Front Lap Calender Roll, 9 in. dia.

V1 Front Lap Calendar Roll Gear, 53 T.

V2 Back Lap Calendar Roll Driving Gear, 24 T.

W Back Lap Calender Roll Intermediate Gear, 22 T.

X Back Lap Calender Roll Gear, 24 T.

X1 Back Lap Calender Roll, 9 in. dia.

{49}

INTERMEDIATE AND FINISHER LAPPERS.

DRAFT CALCULATIONS.

[Ill.u.s.tration]

{50}

PRODUCTION CALCULATIONS.

[Ill.u.s.tration]

NOTE--With our latest gearing arrangement, the number of teeth in Knock-off Worm Gear corresponds to the number of yards in the lap.

{51}

INTERMEDIATE AND FINISHER LAPPERS.

DRAFT TABLE.

[Ill.u.s.tration]

{52}

[Ill.u.s.tration]

AUTOMATIC HOPPER FEEDER

{53}

[Ill.u.s.tration]

SELF-FEEDING OPENER (30-IN. CYLINDER) WITH CAGE SECTION AND CALENDER HEAD

{54}

[Ill.u.s.tration]

SELF-FEEDING OPENER (30-IN. CYLINDER) AND SINGLE BEATER BREAKER LAPPER

{55}

[Ill.u.s.tration]

SELF-FEEDING OPENER (18-IN. BEATER) AND SINGLE BEATER BREAKER LAPPER

{56}

[Ill.u.s.tration]

SELF-FEEDING OPENER (18-IN. BEATER) CONNECTED BY TRUNKING TO A SINGLE BEATER BREAKER LAPPER WITH GAUGE BOX AND CONDENSER

{57}

[Ill.u.s.tration]

SELF-FEEDING OPENER (30-IN. CYLINDER) CONNECTED BY TRUNKING TO A SINGLE BEATER BREAKER LAPPER WITH GAUGE BOX AND CONDENSER

{58}

[Ill.u.s.tration]

SINGLE BEATER INTERMEDIATE OR FINISHER LAPPER

{59}

[Ill.u.s.tration]

THREE-PROCESS SYSTEM OF PICKING WITH 20 FT. OF AUTOMATIC CLEANING TRUCK ALSO CONDUCTING TRUNK BETWEEN OPENER AND BREAKER